Porsche Brembo 996 BBK Conversion-- let's figure out how to fix the dust boots

[Obioban]

Ordering!

Just to short cut everyone...
Fronts are 36 and 40. Rears are 30 and 28. You will need 8 total kits for 4 calipers.

https://www.ohioperformancesolutions.com/product-page/caliper-dust-boots-silicone

[OPS]

Dust boots arrived and I have updated the inventory on the site. Sizes 28-44mm are available!

Mike
OPS

[OPS]

I feel your pain! I must have thrown away 500 dust boots...

[Tbonem3]

On no they're grey! I'm having PTSD from stoptech boots

[OPS]

Should be here Monday!

[OPS]

Nardo S54 Ok I'll have you covered!

[Nardo S54]

Packaging finalized last week - I was hoping to get the tariff situation completed before next order (I think something is supposed to happen in October currently at 34% - who knows!) but I rather get them in your all hands.

Let me know what sizes you all want! Basically 26 through 46mm will be produced and sold in pairs. And for those who are running without boots (track junkies) I will also be offering just the seals also.

Pic for the heck of it of Frenkit in Spain just to show their scale.

I need standard sizes for the 996 calipers, which I believe are 40, 36, 30, 28?

[OPS]

Order submitted for individual (pair) dust boots. sizes 28-44. Should have them late this week - it all depends on customs.

Mike

[OPS]

Tonggi are you running the 996 fronts and rears? Or something else?

Mike

[Tonggi]

Packaging finalized last week - I was hoping to get the tariff situation completed before next order (I think something is supposed to happen in October currently at 34% - who knows!) but I rather get them in your all hands.

Let me know what sizes you all want! Basically 26 through 46mm will be produced and sold in pairs. And for those who are running without boots (track junkies) I will also be offering just the seals also.

I plan to rebuild my kit Q1 of 2026 after I get my calipers refinished. I primarily cruise around and drive to and on the track in FL. So occasional Rain, no salt or snow. Can you recommend a kit for me? (all 4 corners)

[OPS]

Packaging finalized last week - I was hoping to get the tariff situation completed before next order (I think something is supposed to happen in October currently at 34% - who knows!) but I rather get them in your all hands.

Let me know what sizes you all want! Basically 26 through 46mm will be produced and sold in pairs. And for those who are running without boots (track junkies) I will also be offering just the seals also.

Pic for the heck of it of Frenkit in Spain just to show their scale.

[Nardo S54]

Confirmed dust boot kits will be made!

Mike
OPS

Bump for update. Looking for link for boots only.

[OPS]

Confirmed dust boot kits will be made!

Mike
OPS

[Riley]

Most pistons are good to go unless they went flying across the room when they were extracted!

Mike

Yea, let’s see how I do with that 😂

[OPS]

Glad I found this thread. Just ordered some 996 calipers so looking for rebuild kits. Once I get my calipers and assess the pistons I will be placing my order from OPS!

Most pistons are good to go unless they went flying across the room when they were extracted!

Will update - next step is packaging (they decide how to package) Thanks for the suggestions!

Mike