F8X M3/M4 CF Drive shaft mod

[bigjae46]

LOL. This is hilarious. Sorry to rain on your parade but this is the exact place I had my vibrating driveshaft done. 😂

Oh shit…really? 🤣🤣🤣

I asked and they said they’ve never done one before so I assumed it was a different place. I think these guys were split off from the company I’ve dealt with in the past (Powertrain Industries)…or something which is what made getting to this point a massive PIA.

That guy Eric told me there’s a 1 year warranty. Take your driveshaft back and make them fix it. I can try and help I really don’t know these guys. I have a rep I deal with at Powertrain so I can take care of issues.

Sorry everyone!

[EthanolTurbo]

Update pt 2:

Just picked up the driveshaft from the shop. I asked them how they knew it was too short or too long, they said they opened the CV joint and inside you can see if it's too compressed or not due to the traces and marks it leaves inside. It was running too compressed due to the DS being too long. Their original measurement and drawing was based on the 2 piece length but after seeing the CV joint, they said that 3/8th of an inch reduction was necessary.

[EthanolTurbo]

Update: the driveshaft shop (DriveshaftPro) called me and said my driveshaft is ready for pickup. I dropped it off last week explaining the vibration issues.

Here is what they said:

"The original drawing we went off of caused the driveshaft to be too long. We shortened it by 3/8ths of an inch and rebalanced it. This should resolve any vibration issues. The CV joint wouldn't have lasted long due to this."

So whatever specs I posted above for measurements needs to be reduced by 3/8ths of an inch. 53.875 inches needs to be cut down to 53.5 inches.

Going to pick it up today on the way to Disneyland. I have to reinstall it, but it looks like OEM carbon fiber driveshafts might be back on the menu, boys. If it works without any vibration issues, I will get a quote for 5-10 of these to be done to try to get better pricing.

[Slideways]

Who's done it successfully?

I saw one post where someone said they didn't get to drive it much, but didn't notice vibration.

I'd want a little more assurance than that before moving forward.

That driveshaft was fabbed at a shop in Germany, IIRC. It would be nice to see at least 1000 miles and some track abuse before confirming the best shop for this driveshaft mod.

[9kracing]

Who's done it successfully?

I saw one post where someone said they didn't get to drive it much, but didn't notice vibration.

I'd want a little more assurance than that before moving forward.

[Projecte46m3]

Can people who’ve had the conversion done successfully share the name of the shop that did the work? I’m not trying to pay a random place $1k to do questionable work lol.

This!!!

[Slideways]

LOL. This is hilarious. Sorry to rain on your parade but this is the exact place I had my vibrating driveshaft done. 😂

Practice makes perfect

[SQ13]

Can people who’ve had the conversion done successfully share the name of the shop that did the work? I’m not trying to pay a random place $1k to do questionable work lol.

[EthanolTurbo]

Eric@driveshaftpro.com

714-893-4585 ext 106

Reach out to Eric, tell him Break My Wallet Motorsport sent you. Will cost about $800. They pay shipping to you within the US. You’ll have to pay to ship the driveshaft to them.

You could make arrangements with Eric and then buy a driveshaft on EBay and just have it shipped directly to DriveshaftPro.

here is the address to send the driveshaft.

DRIVESHAFTPRO ATTN: ERIC


7532 ANTHONY AVE.


GARDEN GROVE, CA. 92841

LOL. This is hilarious. Sorry to rain on your parade but this is the exact place I had my vibrating driveshaft done. 😂

[fattycharged]

Nice work Jae. Now to find a cheap one on fleabay

[bigjae46]

Eric@driveshaftpro.com

714-893-4585 ext 106

Reach out to Eric, tell him Break My Wallet Motorsport sent you. Will cost about $800. They pay shipping to you within the US. You’ll have to pay to ship the driveshaft to them.

You could make arrangements with Eric and then buy a driveshaft on EBay and just have it shipped directly to DriveshaftPro.

here is the address to send the driveshaft.

DRIVESHAFTPRO ATTN: ERIC


7532 ANTHONY AVE.


GARDEN GROVE, CA. 92841

[bigjae46]

The place I've been talking to is ready. Let me just get a confirmation that I can post his info here. He'd probably be OK with that but I want to verify first.

It will be easy. You contact him, pay the invoice and ship an F8X M3 carbon driveshaft. Usually about 1-1.5 weeks...you get the driveshaft back.

[simonnim]

I just picked up a carbon shaft off ebay for $278 shipped. I'll be looking for a 330 shaft for the flange and CVJ (any specific years?).
Has anyone found OE alternatives that we can by new for the flange and CVJ?

Any shop that deals with driveshafts will have these parts on shelf/order.

[gheorghe]

I just picked up a carbon shaft off ebay for $278 shipped. I'll be looking for a 330 shaft for the flange and CVJ (any specific years?).
Has anyone found OE alternatives that we can by new for the flange and CVJ?

[bigjae46]

reported to mods for parts curation. consider your days numbered

🤣🤣🤣…this more like a dump and run away…🤣🤣🤣