F8X M3/M4 CF Drive shaft mod

[0-60motorsports]

Don't worry, I have 4 more ready to go.

LOL I want one!

[SliM3]

Can you post exact part number please? Thanks

Don't know if this helps or not, but this is the one I purchased.



Sent from my iPhone using Tapatalk

[Altaran]

lol. My best friend bought 1 after I ordered, too.

If this catches on, it's gonna suck for f8x owners that need a replacement 🤣

Haha, I am even thinking about buying a spare one for a possible second build so I can still get one cheap.

Glad to see I was able to spark some interest on this.

Gesendet von meinem Pixel 7 mit Tapatalk

[nyc951]

Can you post exact part number please? Thanks

[Obioban]

lol. My best friend bought 1 after I ordered, too.

If this catches on, it’s gonna suck for f8x owners that need a replacement 🤣

[EthanolTurbo]

There were a ton available, I looked before I posted or I would have bought one already too, lol

Don't worry, I have 4 more ready to go.

[George Hill]

Until we all start trying to snatch them up online at the same time 😂

There were a ton available, I looked before I posted or I would have bought one already too, lol

[SliM3]

Until we all start trying to snatch them up online at the same time 😂

Why I went ahead and picked one up on eBay just now! I can already see this mod going mainstream…can't lie tho, I'm still tripping out off the price of these things..


Sent from my iPhone using Tapatalk

[PHNX636]

So we are all eyeing this mod, lol.

[Derek //M]

Wow, these are so cheap, following with great anticipation, lol.

Until we all start trying to snatch them up online at the same time 😂

[Obioban]

Is the welded steel section bonded to the CF or is it removable somehow?

Bonded.

It’ll be cutting off some portion of the stock f8x steel parts, welding on the e46 flanges (carefully managing heat and setting the lengths to e46 driveshaft length), and then balancing the final assembly.

[Obioban]

I have a local driveshaft shop I’m pretty confident in— they shortened the driveshaft for my e60 M5’s SMG to 6mt conversion, and you’d never know it wasn’t stock. Completely smooth at all speeds..

I’m going all in— using the flanges from my current, stock driveshaft rather than sourcing new parts. No easy back tracking for me

[discoelk]

Is the welded steel section bonded to the CF or is it removable somehow?

[Altaran]

What kind of "shop" would one be looking to find to do this kind of work? Any particular flanges to use (BMW part, or...?). I'm very interested in this, looks like you can't buy new shafts--so eBay is the purveyor of choice here?

The shop that I used specializes in servicing driveshafts. For the main part the shop has to have excellent welders and experience with balancing shafts.

No, you can't buy them new. BMW stopped using CF shafts in the M4 when they had to start using particle filters in Europe. (When downgrading to a smaller diameter steel shaft it created more space to fit the filter in the exhaust). At least that was the official explanation.

330 driveshafts use the same flanges as the M3. And they are cheaper than used M3 shafts.


Gesendet von meinem Pixel 7 mit Tapatalk

[George Hill]

Wow, these are so cheap, following with great anticipation, lol.