So I just got done with installing a Z3 2.7 ratio steering rack into my car. After install, while the car was still in the air, I went lock to lock multiple times to bleed air out of the system. I then had my wife do the same thing while I watched the reservoir for air bubbles. Once the bubbles stopped I buttoned everything up and proceeded to drive the car. I am now getting a shudder feedback in the steering wheel when turning. The faster I am going and turning the more noticeable the shuddering is. I noticed mainly when I was backing out of my driveway the shudder and when I let the steering wheel go it abruptly tries to center itself. Almost likes its under tension. Anyone have any kind troubleshooting tips to fix this? Should I do another flush?
Comment