e46 M3 Community-designed CAD files Master List

[Nate047]

Don't do this cause it's sketchy, but: https://nam3forum.com/forums/forum/m...348#post284348

But for real, only consider this if you're never gonna have loose stuff in the trunk and never gonna have rear passengers

Right on. What we want to do would be just for track cars, or as a removable piece you can put in for a track day, so nothing is ever going to be loose in the back of the car.

There are plenty of panels out there and ways to block off just the rear seat, but notably, there is no solution to cover all the exposed areas when you remove the whole back seat and the door cards. I hate seeing the crappy paint and all the wiring, but I’m also not trying to fully gut the car and paint it. We are going to use my car and my friends car which is totally stock, to see if we can make something somewhat easy and reversible. Might not work out, but worth taking a look at.

[heinzboehmer]

Hey guys, does anyone have existing data for a stripped rear interior? My friend and I are thinking about trying to make a cosmetic rear seat and door panel delete panel set that would be modular and cover all the painted areas and wires etc…

Don't do this cause it's sketchy, but: https://nam3forum.com/forums/forum/m...348#post284348

But for real, only consider this if you're never gonna have loose stuff in the trunk and never gonna have rear passengers

[Nate047]

Hey guys, does anyone have existing data for a stripped rear interior? My friend and I are thinking about trying to make a cosmetic rear seat and door panel delete panel set that would be modular and cover all the painted areas and wires etc…

[bimmerfan08]

Stickied this thread.

... now nobody will ever look at it.

I actually caught it because it was stickied. Great thread.

[Sid_E46]

Here is a little blockoff for the CSL center console mirror control switch.

https://www.thingiverse.com/thing:6792742

[terra]

CSL inlet grille. Original part courtesy of ugaexploder. OE part on the right. Textured build plate creates a textured face but a smooth plate would create a smooth part like OE. You'd never know this isn't OE when installed though.

Can anyone host a step file? I can upload a STL but in my experience, quality is compromised.

Edit: it seems like I cannot upload an STL either.

You should be able to upload them as a part of a zip file if under 10MB

[discoelk]

CSL inlet grille. Original part courtesy of ugaexploder. OE part on the right. Textured build plate creates a textured face but a smooth plate would create a smooth part like OE. You'd never know this isn't OE when installed though.

Double edit: step file attached.

[0-60motorsports]

As above, i have heard from P0lar in years, a great bloke and instrumental in discovering the mysteries of the MSS54.

When did you last hear from him?

Years ago! I even sent him a few emails but never got a response.

[ac427]

Thanks for posting this. Man i haven't heard from p0lar in years, eben though i tried to reach out. Hope he is ok.

MavJ
As above, i haven't heard from P0lar in years, a great bloke and instrumental in discovering the mysteries of the MSS54.

When did you last hear from him?

[0-60motorsports]

Hi guys,

I'm an old acquaintance of Obioban and old friend of p0lar - back when I lived in Montreal, Canada.

I had a 2005 e46 M3 that tracked regularly at Tremblant and Calabogie. Terrorized the GT3s at the Tremblant Club. Had a lot done to the car before I found it submerged in knee-high water from a flood. 😥

We were a bunch of kids and we made this rear seat delete from 5051 aluminum and as I rekindled my interest in cars (actually, the Supra atm - sorry!) I came across some pics and this cad info. Maybe it'll be of use to the community. I think p0lar would like this shared. Should have done it sooner.

Love seeing the M community and the car community grow! 🙂

If you see some old guy heel-toeing, karting like a maniac, making kids cry in Vancouver, come say hi! 😎

https://tinyurl.com/e46seatdelete

Thanks for posting this. Man i haven't heard from p0lar in years, eben though i tried to reach out. Hope he is ok.

[MavJ]

Hi guys,

I'm an old acquaintance of Obioban and old friend of p0lar - back when I lived in Montreal, Canada.

I had a 2005 e46 M3 that tracked regularly at Tremblant and Calabogie. Terrorized the GT3s at the Tremblant Club. Had a lot done to the car before I found it submerged in knee-high water from a flood. 😥

We were a bunch of kids and we made this rear seat delete from 5051 aluminum and as I rekindled my interest in cars (actually, the Supra atm - sorry!) I came across some pics and this cad info. Maybe it'll be of use to the community. I think p0lar would like this shared. Should have done it sooner.

Love seeing the M community and the car community grow! 🙂

If you see some old guy heel-toeing, karting like a maniac, making kids cry in Vancouver, come say hi! 😎

https://tinyurl.com/e46seatdelete

[discoelk]

Is there an app for iOS that people have been using to scan this? Or does this need to be made from scratch using some CAD software?

There probably is but it looks so geometric that it would be easier to model from scratch than to clean up a scan. I'll shoot you a PM. I'm local-ish and have all the hardware/software needed.

[ugaexploder]

It's modeled well but the few things that I've used it for required dimensional changes.

Inlet grill is easy but you need an OEM one to copy or a bumper to design from.

Is there an app for iOS that people have been using to scan this? Or does this need to be made from scratch using some CAD software?

[Obioban]

Stickied this thread.

... now nobody will ever look at it.

[heinzboehmer]

Wrong kind of engineer for this, so don't laugh at my CAD skills, but phone mount available here in case anyone wants to print it out for themselves: https://cad.onshape.com/documents/aa...abcccfec208abd

More details here: https://nam3forum.com/forums/forum/m...560#post274560