PSA: Get an Eventuri Scoop

[LSB4Me]

Have you done any kind of measurements or seat of the pants feel for it? I currently have Eventuri intake with the elephant trunk plugged into the brake duct hole. I was thinking of attaching the scoop to it as well. At this point though the intake sounds really good, I am wondering what would be the difference if I add the scoop into the mix the way you have it in the picture.

I have a “different” setup than most here—Evolve box. But for me, the scoop really was a surprising improvement. Silly, I know.

Unpopular opinion: keep the Eventuri. I really enjoyed mine. A strong argument can be made for stopping at the Eventuri, especially in CA. Lots of smiles/dollar; minimal headaches.

[siamkazi]

Siam: If you want to keep it there I don't see why you couldn't put it on the replacement duct



Correct

If that's the case, then i'll take one! Let me know how to go about, appreciate it!

[AWE46M3]

Have you done any kind of measurements or seat of the pants feel for it? I currently have Eventuri intake with the elephant trunk plugged into the brake duct hole. I was thinking of attaching the scoop to it as well. At this point though the intake sounds really good, I am wondering what would be the difference if I add the scoop into the mix the way you have it in the picture.

I've only ever heard the intake with the scoop so can't speak to how it sounds without it. OP mentioned a noticeable sound and seat dyno improvement after implementing the scoop. I am running Brysons mullet tune and the car runs incredibly well - very happy with all aspects of the CSL airbox mod. From my perspective, the scoop is a nice value add to ensure the airbox is getting fresh air. The overall sentiment of this thread is to install one (either the eventuri or Bryson's custom 3d printed unit Kaiv sells).

[kaiv]

Siam: If you want to keep it there I don't see why you couldn't put it on the replacement duct

This is for oem bumper with CSL airbox, correct?

Oem bumper with Oem airbox is a no go?

Correct

[x Spades x]

This is for oem bumper with CSL airbox, correct?

Oem bumper with Oem airbox is a no go?

[6speedS54]

Anri made this for me. He cut the lower section with the collar that draws air from the fog light duct and fitted the Eventuri scoop to seat inside the factory duct leading into the engine bay. I also have my IAT sensor (US style) installed at the top of this duct, where the collar flares out.

Have you done any kind of measurements or seat of the pants feel for it? I currently have Eventuri intake with the elephant trunk plugged into the brake duct hole. I was thinking of attaching the scoop to it as well. At this point though the intake sounds really good, I am wondering what would be the difference if I add the scoop into the mix the way you have it in the picture.

[siamkazi]

Hey guys. Yes I do have a few more in stock ready to go. FYI these are designed and manufactured by Bryson but sold through me as he wishes not to deal with that aspect. They are ~220 or so including shipping and a chunk of the proceeds go back to him making more cool parts for our cars. I also have another video showing more details/install I can share although it should be pretty self explanatory for most. LMK if I can help!

If my IAT is in the brake duct, will this mess with anything? Really want this.

[kaiv]

Hey guys. Yes I do have a few more in stock ready to go. FYI these are designed and manufactured by Bryson but sold through me as he wishes not to deal with that aspect. They are ~220 or so including shipping and a chunk of the proceeds go back to him making more cool parts for our cars. I also have another video showing more details/install I can share although it should be pretty self explanatory for most. LMK if I can help!

[old///MFanatic]

Found Kaiv’s post on his IG and recorded the clip to save you all a few clicks. This is what it looks like IRL + installed on the car.
https://youtube.com/shorts/bWaXEt_6c...d6iI68desX5Ogf

Thanks. Looks very functional. I will check if I still have Kaiv’s number. Been a long time since he use to cruise by and do my valve adjustments in his early years.

[AWE46M3]

Found Kaiv’s post on his IG and recorded the clip to save you all a few clicks. This is what it looks like IRL + installed on the car.

https://youtube.com/shorts/bWaXEt_6c74?si=lOd6iI68desX5Ogf

[x Spades x]

kaiv

Bump!

[AWE46M3]

Anyone on forum ever finish up on this idea with something plastic and not over priced?

Saw kaiv printed a sold a few of these in an instagram post a while back. Tagging him to the post in case he's got some extras for sale.

[old///MFanatic]

Anyone on forum ever finish up on this idea with something plastic and not over priced?

[ATB88]

I think this thread has single handedly prevented me from impulse buying a CSL bumper this week. Thanks guys, my bank account lives another day!

[AWE46M3]

I was creating a plastic version of the Eventuri scoop that pulled through the brake duct, used the stock tube that comes out it the brake duct area and then connects to the bottom of the elephant trunk that then connects to the snorkel… but, got tired. lol

Brilliant - I would definitely be interested in something like this Bry5on . Staying subscribed to this thread