Announcement

Collapse
No announcement yet.

No Crank

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No Crank

    Replaced starter solenoid still no crank, no 12v at exciter wire, cleaned ignition switch and tested OK on another car, any idea’s?
    Last edited by M493; 07-26-2025, 07:19 AM.

    #2
    Originally posted by M493 View Post
    no 12v at exciter wire
    The smaller wire to starter? If yes, then
    check pin1 and pin2 -- two largest pins -- of the EWS connector with EWS connected for 12v while key turned to START.

    Comment

    Working...
    X