Few years ago I did my xenon projector upgrade. Everything went just fine except my flashers didn’t work. I remember calling lightwerkz and he told me to solder the red and green wires together. Then after I put everything back in the car he actually called me back and told me to do the black and green. So I said screw this another day. And now the day has come.
Regardless, I am now taking it apart and this is what I have found. The red and green wires and connected and the black is separate. And they all go to a 2 pin plug that is plugged into… nothing.
Any help as to what I should do to finish?
Regardless, I am now taking it apart and this is what I have found. The red and green wires and connected and the black is separate. And they all go to a 2 pin plug that is plugged into… nothing.
Any help as to what I should do to finish?
Comment