End links question

[Leafsrule531]

I’m putting on Koni yellow sport shocks and struts on my m3 coupe with h and r springs. They are standard springs not lowering springs.

I was wondering what end links I should be using for this setup ? Historically I had shorter end links because I was using kw coilovers which required them.

can I keep using the shorter end links or should I get the standard ones. I read on some other forums that the Koni’s use shorter ones also ?

im keeping stock height and not lowering

[SteelGreyM]

I would use stock end links with stock ride height. Are your shorter ones adjustable ? If so you can use them.

The correct way to install adjustable is to connect the end links to both shocks. Then hook up one side to the sway bar and tighten everything up. Then you set the car on the ground, crawl under there and adjust the other side so that it slides into the sway bar with no effort and tighten it up.