Question for those with Rogue strut bar

[Cubieman]

When installing/removing your RE bar does it lift straight off and go straight on no problem?

The reason I ask is their website makes mention of the fact you may need to drop one of the struts from the tower slightly for installation, presumably if your strut towers have moved and the bar won't evenly slip over all 6 studs.

[Ramps]

Mine goes on fine, it does get hung up on the threads a bit but a little wiggle and it pops on/off.

[eacmen]

No issues here. Its a little tight but nothing crazy. Worst case expand the slots a little.

[davidinnyc]

I have two Rogue bars: one is tight and requires lifting one side of the car up, the other on a separate car slides on just fine.

[Cubieman]

I have two Rogue bars: one is tight and requires lifting one side of the car up, the other on a separate car slides on just fine.

Interesting, I guess it could be the car or the bar in regards to fitment.
I have one order, late Feb. until they are in stock unfortunately.

Going to try that and hope to find something else down the line if that doesn’t fit or installation/removal is constantly an issue.