Announcement

Collapse
No announcement yet.

No crank, no start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No crank, no start

    Hey guys
    recently changed the motor on the smg pump and when we went to start the car, the car will not start, crank, or click. Since the car has been sitting for a while we thought the battery might not be sending enough volts so we went ahead and replaced the battery. Nothing. We took the starter out and tested it and it seems to work fine. Looked online to see other solutions and many others refer to the key as the problem but this key is *relatively* new (about 3 years old). Any suggestions would be great thanks!

    #2
    Did you remove any of the plugs from the SMG or engine ECU whilst you were working?

    Comment


      #3
      Originally posted by Martyn View Post
      Did you remove any of the plugs from the SMG or engine ECU whilst you were working?
      yes all the plugs from the SMG

      Comment


        #4
        Make sure all the grey plugs are plugged into the SMG module and black plugs went back into the ECU. It's easy to mis-plug the connectors.

        Comment

        Working...
        X