Announcement

Collapse
No announcement yet.

UPDATED: Camber issue with Vorshlag camber plates

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by moproblems View Post
    I had a similar issue where they didn't send the adapters in the spring perch for the MCS shafts. Guessing the help isn't as good as it used to be.
    It's definitely a small operation. They're usually really good about correcting any mistakes, but sometimes it does require an extra email or call. In my experience.

    Comment


      #17
      Well...the bushing didn't make it in time so it spent the last weekend driving on my old ass TCKs.

      Comment


        #18
        What part number were your bilsteins? I was thinking of picking up the 48-16687 (PSS10) with the Vorshlags
        '03 Oxford Green ///M3​ Convertible

        Comment


          #19
          Originally posted by oprah View Post
          What part number were your bilsteins? I was thinking of picking up the 48-16687 (PSS10) with the Vorshlags
          I have the non-M dampers but I ended up being an oddball. I had the longer M3 shaft with 14mm threads.

          Usually it is longer shaft w/12mm threads or a shorter shaft with 14mm.

          Comment


            #20
            Updated original post

            Comment

            Working...
            X