E46 M3 S54 Vanos pressure tests

[heinzboehmer]

Are you sure that S54 Vanos banjo bolt fit size is M10x1.0
I read in another forum that it requires M12x1.5

please confirm it and if anybode else have the exact answer please let us know

I'm not sure what the banjo bolt specs are, but those are the exact listings I bought from (pulled them from my purchase history) and they fit the engine just fine.

[Ahmed.Alghoul]

This is what I bought.

Fitting: https://www.ebay.com/itm/M10-x-1-0-S...t/361110675174
Gauge: https://www.ebay.com/itm/201L-158O-1...i/172993590870

Works completely fine, but does require you to remove the beauty cover, otherwise the gauge hits it when being screwed in. Maybe get an extension fitting so this isn't an issue.

Are you sure that S54 Vanos banjo bolt fit size is M10x1.0
I read in another forum that it requires M12x1.5

please confirm it and if anybode else have the exact answer please let us know

[Ahmed.Alghoul]

This is what I bought.

Fitting: https://www.ebay.com/itm/M10-x-1-0-S...t/361110675174
Gauge: https://www.ebay.com/itm/201L-158O-1...i/172993590870

Works completely fine, but does require you to remove the beauty cover, otherwise the gauge hits it when being screwed in. Maybe get an extension fitting so this isn't an issue.

Perfect
thank you

[heinzboehmer]

Need more information about the vanos fitting adapter size ,where could find online.

This is what I bought.

Fitting: https://www.ebay.com/itm/M10-x-1-0-S...t/361110675174
Gauge: https://www.ebay.com/itm/201L-158O-1...i/172993590870

Works completely fine, but does require you to remove the beauty cover, otherwise the gauge hits it when being screwed in. Maybe get an extension fitting so this isn't an issue.

[Ahmed.Alghoul]

Need more information about the vanos fitting adapter size ,where could find online.

[sapote]

The video shows the pressure reached 140 bars which is too high. Should be 115 bars max.

The graph shows the accumulator (not actuator as in the data table) seems to be fine with pressure slowly drop over 1 minute. Bad ACC would cause the pressure to drop very fast.

Edited: I was wrong: the video shows 114 bars which is OK, not 140.

[Ahmed.Alghoul]

Results from my Vanos tests carried out recently, (UK custom guage kit off EBay).
Its somewhat more thorough than the one I'd posted out back in 2016, where I had faults causing v low vanos oil pressure and Ive defined some simple benchmarks, this so that with others data, we could look at establishing indicators that can help us determine whether our systems are at full health.
Am keen to get your feedback (and data points) to work this one further up, please comment.

Would you add the link for the uk custom guage kit in ebay.

Sent from my SM-G930F using Tapatalk

[911Fiddler]

Having a little trouble uploading a revised pic for the benchmark table onto the original post.

[911Fiddler]

Here are the results, (graph & results table inc two Id done a while back).
Because my pressure has fallen a little, and the mechanical response times have slowed slightly, I think Im now ready for fresh Beisan piston seals.

[911Fiddler]

Results from my Vanos tests carried out recently, (UK custom guage kit off EBay).
Its somewhat more thorough than the one I'd posted out back in 2016, where I had faults causing v low vanos oil pressure and Ive defined some simple benchmarks, this so that with others data, we could look at establishing indicators that can help us determine whether our systems are at full health.
Am keen to get your feedback (and data points) to work this one further up, please comment.