SMG to 6spd easy coding?

[DiegoD]

Hey guys. Just about to go from SMG to Manual. Got all the pieces but I am still figuring out the coding.
Is the ECUWORX tool the easy way to do it? Just got it and looks like it is. Any one has done it that way? Will I need additional coding?

one other project I have is to remove the wiring. Has anybody done this?

[eacmen]

I believe you need to do a full bin flash of a matching 6MT program for your ecu.

I think ecuworx only flashes partial bin.


Sent from my iPhone using Tapatalk

[Martyn]

You can use my software for the ECU side of the swap, but you'll still need to recode the rest of the vehicle with NCSExpert.

[ejendow]

Don't know what your budget is or if you have the desire to do it yourself, but I just completed mine and had Martyn remotely complete the coding portion and it was easy and done in 10 minutes. Would definitely recommend that route.

[DiegoD]

Don't know what your budget is or if you have the desire to do it yourself, but I just completed mine and had Martyn remotely complete the coding portion and it was easy and done in 10 minutes. Would definitely recommend that route.

Exactly what I had in mind!

[DiegoD]

You can use my software for the ECU side of the swap, but you'll still need to recode the rest of the vehicle with NCSExpert.

Thank you very much! I will be contacting you.