Announcement
Collapse
No announcement yet.
The "Post Your Wheel Setup" Thread
Collapse
X
-
Might be worth looking into again. They have a lot of options in our sizes right now.Originally posted by repoman89 View Post
They’ve grown on me a little, but mostly because I don’t like how they look. I’m not above a little form over function for the street setup.
- Likes 1
Leave a comment:
-
Why don't you use Volks?Originally posted by repoman89 View PostBimmerworld TA16 18x9.5 ET35 for the track (12mm spacers in the rear)
OE ZCPs for the street (18mm spacers in the front).
I'm wishing I got my track wheels in ET22 to not run spacers, it makes me paranoid .. I may swap next time I need tires (after next season at this rate, RS4 tires are running forever). Also on the lookout for a quality and pretty set of 18" forged (staggered) street wheels that fit my 996 brakes without spacers.
Leave a comment:
-
Bimmerworld TA16 18x9.5 ET35 for the track (12mm spacers in the rear)
OE ZCPs for the street (18mm spacers in the front).
I'm wishing I got my track wheels in ET22 to not run spacers, it makes me paranoid .. I may swap next time I need tires (after next season at this rate, RS4 tires are running forever). Also on the lookout for a quality and pretty set of 18" forged (staggered) street wheels that fit my 996 brakes without spacers.
- Likes 1
Leave a comment:
-
OEM ZCP's widened to 19x9" and 19x10.75" with 12/15mm spacers and 245/275 tires.
IMG_0333 copy by Greg Wolfe, on Flickr
Mr. Wolfe
- Likes 4
Leave a comment:
-
Those are a bit like the Work Emotion T7R or Volk ZE40s. They look fantastic. I still think I prefer an 18" wheel on the e46, but man, killer wheel setup my dude.Originally posted by Santino View Post
- Likes 1
Leave a comment:
-
19x8.5 19x10 hamann pg3 and bbs LMs
Sent from my iPhone using Tapatalk
- Likes 4
Leave a comment:
-
Will have to revisit again in the future. For now they're on the M2 CS.Originally posted by Rkymtnrider View Post
Can you get more pics at dif. Angles and maybe the poke from front and back? Looks great!!
Leave a comment:
-
They're not for this car anyways, just a case study, they're already on my CSOriginally posted by jet_dogg View PostNot bad, not great.
Leave a comment:
-
Nope. None needed. Perfect offset. Didn't need the 10mm spacers the LM-R's needed to clear the BBKOriginally posted by Nate047 View PostLooks pretty good, sizing is aggressive. Do you have a spacer on the back?
Leave a comment:



Leave a comment: