Airbag + Seatbelt Light on & unable to Connect to SRS Module

[Johnvu]

Hey everyone!

So here is a quick backstory:

1. Installed aftermarket seats with sliders
2. Installed the Passenger Occupancy Simulator + Seat belt receptacle simulators.
3. Forgot to unplug battery the first time so the airbag light was on. I ordered a srs reset tool from ebay and it worked like a charm.
4. Drove around for 1 week with no airbag light on everything was perfect.
5. When sliding the seat forward, the seatbelt receptacle simulator wires got caught and shorted the wires. Both the airbag and seatbelt lights came on.

I have tried both the SRS reset tool and INPA but both are failing to establish an actual connection. At this point, I am worried that the srs computer is fried. Anyone have thoughts on what could be the culprit? Any help would be greatly appreciated! Thanks!

[Johnvu]

Bump! =)

[Arith2]

Start at the fuse. It's there to hopefully stop the computer from blowing up.