Exhaust manifold stud pitch?

[Cubieman]

I having a bit of trouble with my second header install, does anyone happen to know the pitch for the header studs?
I want to say the nuts are M7×39 or M7x1 but don't know to a certainty. I need to chase the threads on the block..I will spare the details. Thanks!

[Icecream]

I having a bit of trouble with my second header install, does anyone happen to know the pitch for the header studs?
I want to say the nuts are M7×39 or M7x1 but don't know to a certainty. I need to chase the threads on the block..I will spare the details. Thanks!

Since you’re going to the hardware store anyway, just take a stud with you and measure it over there.

[Tbonem3]

I believe the studs are m7x1.0mm

39mm may be their length, but has nothing to do with diameter or pitch. Irrelevant to cleaning/chasing threads anyway.

[Cubieman]

Someone on m3cutters had said M7×39 as a pitch so that just threw me off, it is indeed M7×1 confirmed at the hardware store. Now I just hope my dealership has those nice little etorx studs, likely not the case.