I have a real first world problem I'd like to get your opinion on. I have 3 cars but need to sell one. I'm having a hard time deciding which one to sell. Here are the options:
Car 1: 1995 M3 w/ Dinan S3 pack
Highlights:
- 85k miles
- Genuine LTW aluminum doors and GT spoiler w/ LTW riser
- MA shaw fiberglass hood, trunk, and lexan window
- Dinan base S/C with front mount. 352whp @ 7psi (current), 450whp @ 12psi
- Rebuilt S52, lightened crank, port and polished head, big valves, forged rods and pistons, Schrick cams for FI application, 8.5" twin disc clutch assembly
- Completely stripped interior, no a/c, 2,600lbs
- Fenders widened to run up to a 10.5" wheel w/ 295s square
Car 2: 2002 M3 SMG
Highlights:
- 126k miles
- Vanos, rod bearings, rear subframe mounts reinforced done within the last 5k miles
- All SMG parts including clutch done within the last 3k miles
- Protomachine half cage
- Recaro Pole Position Seats
- Moton Clubsports
- Full interior minus the rear seats
- Sunroof delete with euro head liner
Car 3: 2002 911 C2
Highlights:
- 50k miles
- Eibach lowering springs
- My dad gave me the car since he doesn't want to drive a manual anymore (sentimental value)
I'd keep one as a track car, the other as a weekend/occasional drive to work car. I'm obviously pretty deep with the two BMWs so while I could get okay money for either, I would never get my money back out of either. The Porsche is the most comfortable of the 3 since it has stock seats. Also, the torque of the flat 6 is nice around town. It's just the most boring of the trio.
What would you do?
Car 1: 1995 M3 w/ Dinan S3 pack
Highlights:
- 85k miles
- Genuine LTW aluminum doors and GT spoiler w/ LTW riser
- MA shaw fiberglass hood, trunk, and lexan window
- Dinan base S/C with front mount. 352whp @ 7psi (current), 450whp @ 12psi
- Rebuilt S52, lightened crank, port and polished head, big valves, forged rods and pistons, Schrick cams for FI application, 8.5" twin disc clutch assembly
- Completely stripped interior, no a/c, 2,600lbs
- Fenders widened to run up to a 10.5" wheel w/ 295s square
Car 2: 2002 M3 SMG
Highlights:
- 126k miles
- Vanos, rod bearings, rear subframe mounts reinforced done within the last 5k miles
- All SMG parts including clutch done within the last 3k miles
- Protomachine half cage
- Recaro Pole Position Seats
- Moton Clubsports
- Full interior minus the rear seats
- Sunroof delete with euro head liner
Car 3: 2002 911 C2
Highlights:
- 50k miles
- Eibach lowering springs
- My dad gave me the car since he doesn't want to drive a manual anymore (sentimental value)
I'd keep one as a track car, the other as a weekend/occasional drive to work car. I'm obviously pretty deep with the two BMWs so while I could get okay money for either, I would never get my money back out of either. The Porsche is the most comfortable of the 3 since it has stock seats. Also, the torque of the flat 6 is nice around town. It's just the most boring of the trio.
What would you do?
Comment