USB Dash ports - Dynavin E46 Double DIN Stereo Dash Kit

[poss]

Does anyone know if there is a RHD version of the Dynavin E46 Double DIN Stereo Dash Kit

- or an equivalent solution?

I want to replace the ashtray with some USB ports

[STAATS]

I used this Aux RCA/USB extension cable for my Avant-2 and then my Avant-3 HU. It perfectly replaced the cig lighter... had to modify the trim to get it to sit flush so you cant reinstall the cig lighter once you do it but I doubt that will bother you if you wanted the Dynavin solution anyway... Also FYI I have a RHD car so i can confirm this all works sweet on RHD setup:

https://avinusa.com/usb-aux-3rca.html

[poss]

I used this Aux RCA/USB extension cable for my Avant-2 and then my Avant-3 HU. It perfectly replaced the cig lighter... had to modify the trim to get it to sit flush so you cant reinstall the cig lighter once you do it but I doubt that will bother you if you wanted the Dynavin solution anyway... Also FYI I have a RHD car so i can confirm this all works sweet on RHD setup:

https://avinusa.com/usb-aux-3rca.html

Thanks - but I don't want to lose my cigarette lighter 'cos you need that to run the pump if you get a flat - and I wanted to lose the ashtray entirely replaced with at least 2 USB ports. The Dynavin is perfect except its for LHD only it seems

[Titaniu//M]

Dynavin is not ideal. The cigarette lighter is angled downward so you really can't plug anything into it. Plus, the USB port connection is spotty and disconnects often. Swapping mine back to OEM once I pull the car out of winter storage next Spring.

[STAATS]

Thanks - but I don't want to lose my cigarette lighter 'cos you need that to run the pump if you get a flat - and I wanted to lose the ashtray entirely replaced with at least 2 USB ports. The Dynavin is perfect except its for LHD only it seems

I agree - I just relocated my cig lighter to the boot on a panel in the cubby on the LH side to be able to use the air compressor when required... I alos installed a CTEK charger point for my battery and a battery isolation switch there as well so I don't have to get to the battery to charge it or disconnect when doing work...