Recommendations for a good suspension specialist in NY/NJ area?

[ViN]

Any recommendations for a suspension specialist who knows these cars well? I don't want to go down the trial and error route which I have experienced with a couple of local shops already. These cars already cost enough to maintain. Thanks.

[Sharocks]

Rogue Engineering

[Mystic3]

What are you looking to accomplish or have done ?

[BMWahba]

Rogue Engineering is solid.

[ViN]

What are you looking to accomplish or have done ?

I'd like someone to give a thorough look over of my suspension. I have changed several bushings but the last shop I went to, the owner put it on the lift and came back after a few minutes and said I need new shocks. I took it to another shop for a second opinion. That gent said I didn't need new shocks, that the shocks were in good condition (Ground Control Coilovers with approximately 55k miles on them) but the paint around the shocks were peeling. Car runs fine but my intention is to drop from 19's to 18's and soften up the supension just a bit more. The preivous owner was doing an almost exclusive track build.

[Sharocks]

I'd like someone to give a thorough look over of my suspension. I have changed several bushings but the last shop I went to, the owner put it on the lift and came back after a few minutes and said I need new shocks. I took it to another shop for a second opinion. That gent said I didn't need new shocks, that the shocks were in good condition (Ground Control Coilovers with approximately 55k miles on them) but the paint around the shocks were peeling. Car runs fine but my intention is to drop from 19's to 18's and soften up the supension just a bit more. The preivous owner was doing an almost exclusive track build.

Yea go to Rogue Engineering. They build racecars but also know how to setup these cars for street use.

[Nick_P]

Rogue Engineering is a good shop, I’ve heard good things for AutoCouture although I’ve never personally used them. I use TKX Performance in Long Island.

[bmw m3 s50]

Hey, Any recommendations on good indy shop that knows the e46 m3 inside and out in Philly/NJ area? I am looking for a good shop to start bringing my e46 m3's.

[Cbouts]

Hey, Any recommendations on good indy shop that knows the e46 m3 inside and out in Philly/NJ area? I am looking for a good shop to start bringing my e46 m3's.

Rogue Engineering in NJ and Mainline Motorsport in Exton (west of philly)

[pMak26]

I had a legit, serious race shop do mine and I 100% do not regret it, HRD. https://heinleinracing.com/

I'm sure Rogue is also good, Ben knows his stuff.