BRAKE AIR DUCT TO ALUMINUM BRACKET PLASTIC RIVET

[Mayan-Viking]

Pretty sure this is it:

https://www.ecstuning.com/b-genuine-...h/17111712963/

Jedi level shit right here...

[Casa de Mesa]

Pretty sure this is it:

https://www.ecstuning.com/b-genuine-...h/17111712963/

EDIT 2022-Aug-07: The part number is actually 51711936929 per NZ_M3 post #20 below. Didn't want anyone mistakenly trusting my original post and ordering the wrong part.

[Pklauser]

Anyone ever come up with this part number?

[jareds941]

Pic of the rivet on an eBay listing showing the rivet has 4 prongs and round shape with a big and smooth center rod.

I'd call a dealer and give them the ducting part number, and see what they have as a part number for the rivets and hope it's not the same as the one on real OEM.

[sapote]

Pic of the rivet on an eBay listing showing the rivet has 4 prongs and round shape with a big and smooth center rod.

[sapote]

I know for sure the ducts don't use the same rivet as the inner fender 51161881149 -- its diameter is too small.

[jbfrancis3]

I don't remember if anyone flashed up this part number in the old thread but here is my attempt: 51161881149. This is same as fender liner rivets.

[sapote]

I remember the correct one had the round tip and not spade tip as this suggested one.

[mrgizmo04]

ECS lists this https://www.ecstuning.com/b-genuine-...t/51718229003/

Sent from my SM-G950U using Tapatalk

[sapote]

We beat this dead horse in the old defunct forum but I lost the information on the rivet part number -- the RealOEM listed it wrong. Anyone know the correct part number?

I believe the correct rivet was used on some non E46 cars at other locations.