E46 M3 3D Data source thread

[JeremyJames]

I am making a thread that will represent the best source for all 3D printer format files - .STL, g.code, etc.

For example, files to print the valve shim tool, or a subwoofer box bracket, different interior, exterior, and engine components, etc.

Post up a link to your verified files that have worked flawlessly. Share your thoughts.

[JeremyJames]

Here is a valve shim tool for the S54 that I am currently printing. My cost will be $1. I’ll let you know how it works out in 4 hours after it’s done being printed.

https://www.thingiverse.com/thing:3993884

[eacmen]

Here is a valve shim tool for the S54 that I am currently printing. My cost will be $1. I’ll let you know how it works out in 4 hours after it’s done being printed.

https://www.thingiverse.com/thing:3993884

Nice. I would recommend a small dab of epoxy. You don't want that magnet coming out.

[JeremyJames]

Check this out. I am going to print this @ 25% scale.

https://www.thingiverse.com/thing:3115358

[Icecream]

Check this out. I am going to print this @ 25% scale.

https://www.thingiverse.com/thing:3115358

That is neat. Are people creating these from scratch by 3d scanning in combination with their own measurements or what?