GB: E46 M3 Carbon Driveshaft by MFactory

[0-60motorsports]

About - 350$ going by the E9X M3 GB.

Thanks bud

[Epoustouflant]

How much lower? $1100-1200?

About - 350$ going by the E9X M3 GB.

[0-60motorsports]

The GB has not been posted for E46 M3. It will retail for 1798$. GB will be lower.

How much lower? $1100-1200?

[Epoustouflant]

The link you posted doesnt seem to work but for $1629 shipped, hard pass. I thought the previous GB pricing was much lower than this on the old forums

https://euroconnex.co/collections/e4...veshaft-e46-m3

The GB has not been posted for E46 M3. It will retail for 1798$. GB will be lower.

[0-60motorsports]

The link you posted doesnt seem to work but for $1629 shipped, hard pass. I thought the previous GB pricing was much lower than this on the old forums

https://euroconnex.co/collections/e46-m3/products/carbon-fiber-driveshaft-e46-m3

[Epoustouflant]

Tester has been selected. Thanks to all the PMs!

The GB will be relisted once it has been put on the car, and invoicing will only begin when it has checked off all the right boxes.

[pawa_k2001]

I would be interested in testing. My M3 isn’t a daily but I do a lot of drives.

https://m.youtube.com/watch?v=lqnDrJup4yA

Sent from my iPhone using Tapatalk

[ASAed330]

I would be interested in a 5spd swap length CF driveshaft. On m3forum there was a similar thread and there was interest for a 5spd swap length driveshaft from others as well.

I'm interested in the 5 speed swap length CF driveshaft as well! It isn't that much more expensive than the Bimmerworld retrofit solution and it gets rid of the two piece driveshaft.

[Epoustouflant]

Here is the actual driveshaft

[EthanolTurbo]

Some news guys.

Michael has a E46 CF driveshaft in V3 configuration with the new uni-directional weaved carbon ready to be tested. The deal for testing is 50% off MSRP and any revisions on Michael's dime. PM me if interested. Example from E9X V3 testing.

I'm in 👍

[Epoustouflant]

Some news guys.

Michael has a E46 CF driveshaft in V3 configuration with the new uni-directional weaved carbon ready to be tested. The deal for testing is 50% off MSRP and any revisions on Michael's dime. PM me if interested. Example from E9X V3 testing.

[Epoustouflant]

As a heads up on this. I have paused the GB as there has been delays in getting the raw carbon to make the driveshafts. There is however a test piece for an E46 M3 running around with an improved carbon tube from a new supplier.

Will keep everyone posted

[ra2fanatic]

Make sure you commit here: https://euroconnex.co/products/e46-m...factory-smg-mt

I did

[Epoustouflant]

#4

Make sure you commit here: https://euroconnex.co/products/e46-m...factory-smg-mt

[Epoustouflant]

When I was in talks w/Michael previously w/regards to starting the original GB, he said that we would probably need at least 10 ppl signed up for buying one for a 5spd before he would commit to production. I’m guessing things haven’t changed?

It's at 20 these days - Mfactory has grown a lot, and there are scarcity in supply.