The stock fog assemblies are in pretty bad shape on my car. Thinking about potentially replacing them with something like the Morimoto XB LED Fogs. For those that have swapped to an LED fog light setup, what did you do to secure/mount the resistor in that area? Not a clue how this ought to be done,
-
2012 E92 M3 Competition - LeMans Blue / Speed Cloth - 6MT
[SOLD] 2004 E46 M3 Coupe - Carbon Black / Black - 6MT -
i didn't secure them at all when i swapped in some LED fogs...i imagine i should with just some double sided tape. -
Some beefy double sided tape was what I was leaning towards, i'll give it a try.Originally posted by dr_011 View Post2012 E92 M3 Competition - LeMans Blue / Speed Cloth - 6MT
[SOLD] 2004 E46 M3 Coupe - Carbon Black / Black - 6MTComment
-
I think you can get away without the resistors honestly. They're mainly there to draw extra current to fool bulb out monitors. But in the case of the E46, the fog lights aren't monitored - they're triggered by a standard relay. So just hooking them up directly should be fineComment
Comment