.

[Adorsa-E46M3]

Should I post this in facebook groups to get more responses?

[Epoustouflant]

In for 3.91

Sent from my IN2025 using Tapatalk

1. Bigjae46
2. Bigjae46
3. robgill
4. Randall921
5. Enjoy_m3
6. Cali chase
7 .wrongchi
8. JohnVu
9. Jevi Javi
10. Adorsa-E46M3
11. jbfrancis3
12. bigo1087
13. SQ13
14. mainstreamer00

[SQ13]

Interested in 3.91.

[simplex]

What other parts would be needed in addition to what is being provided from MFactory in this GB for an install into a stock E46M3?

[mainstreamer00]

Will do 3.91 - pricing is too good not to

[Epoustouflant]

What ratio is best for mostly highway driving?

3.91 - 4.10 would be too short.

[S3diment]

What ratio is best for mostly highway driving?

[Hallerhan]

https://www.youtube.com/watch?v=F7QTGKCcWVU&t=441s

thank you! surprisingly doesn't look too difficult. Just need to find someone with a press

[Bigo1087]

In for 3.91

Sent from my IN2025 using Tapatalk

[ATB88]

The progress to 20 has stalled, we need 4 more!!! Let’s make it happen.

contrary to what many here say, if you can do VANOS or rod bearings, you can do this.

I would actually be quite interested in learning how. I can do VANOS and rod bearings, but the big barrier for diff work, to me, is the lack of clear any DIY that lays out exactly what to do and walks me through the careful parts like setting lash, shims, contact pattern etc.

If there were a comprehensive DIY out there for refreshing this diff and doing an R&P swap, I'd definitely do it.

[jbfrancis3]

The progress to 20 has stalled, we need 4 more!!! Let’s make it happen.

contrary to what many here say, if you can do VANOS or rod bearings, you can do this.

From what I can tell there are 2 counts running, one on the group buy page for 3.45/3.62/4.1 ratio and one on this page. Can't we factor in the 3.91 into the overall GB? I'm probably missing something...

Regardless, add me to the 3.91:

1. Bigjae46
2. Bigjae46
3. robgill
4. Randall921
5. Enjoy_m3
6. Cali chase
7 .wrongchi
8. JohnVu
9. Jevi Javi
10. Adorsa-E46M3
11. jbfrancis3

[Epsilon]

Throw up a diy! I can’t find one

https://www.youtube.com/watch?v=F7QTGKCcWVU&t=441s

[Hallerhan]

The progress to 20 has stalled, we need 4 more!!! Let’s make it happen.

contrary to what many here say, if you can do VANOS or rod bearings, you can do this.

Throw up a diy! I can’t find one

[maupineda]

The progress to 20 has stalled, we need 4 more!!! Let’s make it happen.

contrary to what many here say, if you can do VANOS or rod bearings, you can do this.

[Adorsa-E46M3]

I am in for a 3.91 as well!

1. Bigjae46
2. Bigjae46
3. robgill
4. Randall921
5. Enjoy_m3
6. Cali chase
7 .wrongchi
8. JohnVu
9. Jevi Javi
10. Adorsa-E46M3