.

[AK72]

This ships from HK.

can they combine orders? me and my friend ordering to the same place

[Hallerhan]

Pre-order here: https://euroconnex.co/products/forge...ears-pinions-1

has the 4.10 hit the required numbers for the group buy? im looking to put an order in today, but curious how it's handled if not enough people really financially commit

[Epoustouflant]

has the 4.10 hit the required numbers for the group buy? im looking to put an order in today, but curious how it's handled if not enough people really financially commit

The MOQ is a hard 20x with Mfactory. We need to get more going. I'll be working on getting 6MT E9X guys on board. The FB groups for E46 M3s are tough to navigate. Any insights there would be greatly appreciated!

[maupineda]

The MOQ is a hard 20x with Mfactory. We need to get more going. I'll be working on getting 6MT E9X guys on board. The FB groups for E46 M3s are tough to navigate. Any insights there would be greatly appreciated!

get to ZPOST, there maybe a few Z4M interested. I learned about this as I hop in here too often.

[AK72]

get to ZPOST, there maybe a few Z4M interested. I learned about this as I hop in here too often.

I just done it to get numbers going

[Epoustouflant]

I just done it to get numbers going

Thanks a bunch!

[r4dr]

I just done it to get numbers going

Careful with Bimmerpost, they are known to be salty about linking other forums.

[Epoustouflant]

Careful with Bimmerpost, they are known to be salty about linking other forums.

The moderator there is called LAW.

[Jevi Javi]

In for a 3.91

1. Bigjae46
2. Bigjae46
3. robgill
4. Randall921
5. Enjoy_m3
6. Cali chase
7 .wrongchi
8. JohnVu
9. Jevi Javi

[Adorsa-E46M3]

I am in for a 3.91 as well!

1. Bigjae46
2. Bigjae46
3. robgill
4. Randall921
5. Enjoy_m3
6. Cali chase
7 .wrongchi
8. JohnVu
9. Jevi Javi
10. Adorsa-E46M3

[maupineda]

The progress to 20 has stalled, we need 4 more!!! Let’s make it happen.

contrary to what many here say, if you can do VANOS or rod bearings, you can do this.

[Hallerhan]

The progress to 20 has stalled, we need 4 more!!! Let’s make it happen.

contrary to what many here say, if you can do VANOS or rod bearings, you can do this.

Throw up a diy! I can’t find one

[Epsilon]

Throw up a diy! I can’t find one

https://www.youtube.com/watch?v=F7QTGKCcWVU&t=441s

[jbfrancis3]

The progress to 20 has stalled, we need 4 more!!! Let’s make it happen.

contrary to what many here say, if you can do VANOS or rod bearings, you can do this.

From what I can tell there are 2 counts running, one on the group buy page for 3.45/3.62/4.1 ratio and one on this page. Can't we factor in the 3.91 into the overall GB? I'm probably missing something...

Regardless, add me to the 3.91:

1. Bigjae46
2. Bigjae46
3. robgill
4. Randall921
5. Enjoy_m3
6. Cali chase
7 .wrongchi
8. JohnVu
9. Jevi Javi
10. Adorsa-E46M3
11. jbfrancis3

[ATB88]

The progress to 20 has stalled, we need 4 more!!! Let’s make it happen.

contrary to what many here say, if you can do VANOS or rod bearings, you can do this.

I would actually be quite interested in learning how. I can do VANOS and rod bearings, but the big barrier for diff work, to me, is the lack of clear any DIY that lays out exactly what to do and walks me through the careful parts like setting lash, shims, contact pattern etc.

If there were a comprehensive DIY out there for refreshing this diff and doing an R&P swap, I'd definitely do it.