Interest in Schrick Cams GB?

[Epoustouflant]

Wow, Two years....

Covid was a PITA, Schrick has since gone through some changers internally AFAIK.

[0-60motorsports]

Covid was a PITA, Schrick has since gone through some changers internally AFAIK.

ok lets see what the prices are going to be like.

[SQ13]

Will this GB go thru M Power?

[Epoustouflant]

Will this GB go thru M Power?

No! Turner. It will be a year long discount via ConnexPlus. You’ll be saving money at Turner and others, on anything and everything, at anytime.

[Feffman]

On Sale at Turner:

https://www.turnermotorsport.com/p-340423-schrick-camshaft-set-e46-m3-mz3-mz4-s54-288280-125mm-lift/?pdk=AQY

[CrisSilberGrau]

On Sale at Turner:

https://www.turnermotorsport.com/p-340423-schrick-camshaft-set-e46-m3-mz3-mz4-s54-288280-125mm-lift/?pdk=AQY

They were 1400 and change at bimmerworld during the holidays

[Feffman]

Has anyone looked into Cat Cams for the S54? I just became aware of them.

Feff

[Cronenberged]

Has anyone looked into Cat Cams for the S54? I just became aware of them.

Feff

There was a really long thread on cat cams and issues they have.

[SamGrant951]

The issues were from a group buy on m3forum, for some reason they weren't hardened correctly or something and had a lot of failures. Cat cams will now ONLY sell them with their follower kit for the S54. It includes 24 coated steel billet rocker arms, an oil connector that bridges the intake and the exhaust rocker arm shaft (only 1 of them has oil pressure in the original configuration), and 2 brand new BMW modified rocker arm shafts (cross drilled at each rocker and closed off at the end). Just FYI.

[Epoustouflant]

They were 1400 and change at bimmerworld during the holidays

The EUR:USD is up 10% since.

[Feffman]

The issues were from a group buy on m3forum, for some reason they weren't hardened correctly or something and had a lot of failures. Cat cams will now ONLY sell them with their follower kit for the S54. It includes 24 coated steel billet rocker arms, an oil connector that bridges the intake and the exhaust rocker arm shaft (only 1 of them has oil pressure in the original configuration), and 2 brand new BMW modified rocker arm shafts (cross drilled at each rocker and closed off at the end). Just FYI.

Sam:

I'd wondered about the oil pressure in one of the rocker shafts. How do the opposite side shafts or rockers get any oil with no oil pressure?

Feff

[0-60motorsports]

The issues were from a group buy on m3forum, for some reason they weren't hardened correctly or something and had a lot of failures. Cat cams will now ONLY sell them with their follower kit for the S54. It includes 24 coated steel billet rocker arms, an oil connector that bridges the intake and the exhaust rocker arm shaft (only 1 of them has oil pressure in the original configuration), and 2 brand new BMW modified rocker arm shafts (cross drilled at each rocker and closed off at the end). Just FYI.

Thanks for the reminder on this. If i was to get cams it would definitely be Schricks.

[Cronenberged]

No! Turner. It will be a year long discount via ConnexPlus. You’ll be saving money at Turner and others, on anything and everything, at anytime.

Is it ECS Turner or the remaining part of Turner.

[0-60motorsports]

Is it ECS Turner or the remaining part of Turner.

Exactly the same lol

[CrisSilberGrau]

The EUR:USD is up 10% since.

Never seen them that low, made it an easy choice. Jumped on it, will document the power increase. The other bit is I got the 280s to forego another 4k CAd in the followers, plus the overall tunning for it seems to be a bit easier in certain aspects coming from HTE.