Vincebar Group Buy 2021

[Slideways]

Is there any chance of getting a set of the VinceSkinz as well?

Vince said it was only the topside kit, but I emailed him and waiting for a reply.

[cmitch024]

Adding my preference for Epoxy.

1) Slideways (CA) - Epoxy/Rivet Vincebar
2) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
3) ej257 (NE) - Weld-in + Tooling Kit
4) Bimmerrodg (montreal,Canada) epoxy/rivet + tool kit
5) BoostedBoobs (Toronto, Canada) Weld-in kit
6) EthanolTurbo (CA) - Vincebar
7) bran.stum (CA) - Weld in kit, might need tool kit as well. I’ll verify
8) K-Dawg (FL) - Epoxy/rivet kit + tooling kit
9) simonnim (CA) - Epoxy/rivet + tooling kit
10) hallerhan (PA) - Weld in kit
11) SQ13 (TX) - TBD
12) SQ13 (TX) - TBD
13) cmitch024 (TX) - Epoxy/rivet kit + tooling kit
14) kenster (CA) - TBD
15) Monte (OR) - Epoxy/Rivet Vincebar
16) M3kid (FL) - Epoxy/Rivet Vincebar + Tooling kit
17) Tom Day (IL) - Epoxy/Rivet Vincebar

[M3kid]

Is there any chance of getting a set of the VinceSkinz as well?

[Tom Day]

1) Slideways (CA) - Epoxy/Rivet Vincebar
2) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
3) ej257 (NE) - Weld-in + Tooling Kit
4) Bimmerrodg (montreal,Canada) epoxy/rivet + tool kit
5) BoostedBoobs (Toronto, Canada) Weld-in kit
6) EthanolTurbo (CA) - Vincebar
7) bran.stum (CA) - Weld in kit, might need tool kit as well. I’ll verify
8) K-Dawg (FL) - Epoxy/rivet kit + tooling kit
9) simonnim (CA) - Epoxy/rivet + tooling kit
10) hallerhan (PA) - Weld in kit
11) SQ13 (TX) - TBD
12) SQ13 (TX) - TBD
13) cmitch024 (TX) - TBD
14) kenster (CA) - TBD
15) Monte (OR) - Epoxy/Rivet Vincebar
16) M3kid (FL) - Epoxy/Rivet Vincebar + Tooling kit
17) Tom Day (IL) - Epoxy/Rivet Vincebar

[Slideways]

I'm in for one epoxy kit. I was just about to buy one straight from Vince, but he pointed me this way.

Don't need the tool kit, I've installed a few already.

I'm in Oregon, whereabouts are you collecting $$?

Epoxy is the way to go, imho. I've been abusing my M3 with an epoxy bar for years now, and my floor was in pretty bad shape. Absolutely nothing has gotten worse since I fixed up the floor and installed the bar, and the car feels tighter too.

Vince likes the epoxy version since welding can weaken the sheet metal from heat cycling.

Vince will be processing the orders. There is about a week left, so if anyone would like to link this thread (zhpmafia, Euro forums, etc.), the GB should be able to reach the higher discount tiers

1) Slideways (CA) - Epoxy/Rivet Vincebar
2) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
3) ej257 (NE) - Weld-in + Tooling Kit
4) Bimmerrodg (montreal,Canada) epoxy/rivet + tool kit
5) BoostedBoobs (Toronto, Canada) Weld-in kit
6) EthanolTurbo (CA) - Vincebar
7) bran.stum (CA) - Weld in kit, might need tool kit as well. I’ll verify
8) K-Dawg (FL) - Epoxy/rivet kit + tooling kit
9) simonnim (CA) - Epoxy/rivet + tooling kit
10) hallerhan (PA) - Weld in kit
11) SQ13 (TX) - TBD
12) SQ13 (TX) - TBD
13) cmitch024 (TX) - TBD
14) kenster (CA) - TBD
15) Monte (OR) - Epoxy/Rivet Vincebar
16) M3kid (FL) - Epoxy/Rivet Vincebar + Tooling kit

[Monte]

I'm in for one epoxy kit. I was just about to buy one straight from Vince, but he pointed me this way.

Don't need the tool kit, I've installed a few already.

I'm in Oregon, whereabouts are you collecting $$?

Epoxy is the way to go, imho. I've been abusing my M3 with an epoxy bar for years now, and my floor was in pretty bad shape. Absolutely nothing has gotten worse since I fixed up the floor and installed the bar, and the car feels tighter too.

Vince likes the epoxy version since welding can weaken the sheet metal from heat cycling.

[kenster]

It's also technically stronger no? Because of the epoxy covering the whole mating surface vs just the perimeter and plug welds.

Not that I think it'll make a significant difference in this application either way (especially on street cars), but epoxy should leave everything more structurally sound (assuming it's applied correctly and the appropriate thickness is reached and all that).

Thanks for the replys!

[heinzboehmer]

Epoxy/Rivet is more DIY friendly

It's also technically stronger no? Because of the epoxy covering the whole mating surface vs just the perimeter and plug welds.

Not that I think it'll make a significant difference in this application either way (especially on street cars), but epoxy should leave everything more structurally sound (assuming it's applied correctly and the appropriate thickness is reached and all that).

[Slideways]

Very interested in this. Can anyone tell me the pros/cons of the epoxy kit versus the weld in kit. I sent vincent an e-mail, however no response for almost a week now.

Epoxy/Rivet is more DIY friendly

[kenster]

Very interested in this. Can anyone tell me the pros/cons of the epoxy kit versus the weld in kit. I sent vincent an e-mail, however no response for almost a week now.

1) Slideways (CA) - Epoxy/Rivet Vincebar
2) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
3) ej257 (NE) - Weld-in + Tooling Kit
4) Bimmerrodg (montreal,Canada) epoxy/rivet + tool kit
5) BoostedBoobs (Toronto, Canada) Weld-in kit
6) EthanolTurbo (CA) - Vincebar
7) bran.stum (CA) - Weld in kit, might need tool kit as well. I’ll verify
8) K-Dawg (FL) - Epoxy/rivet kit + tooling kit
9) simonnim (CA) - Epoxy/rivet + tooling kit
10) hallerhan (PA) - Weld in kit
11) SQ13 (TX) - TBD
12) SQ13 (TX) - TBD
13) cmitch024 (TX) - TBD
14) kenster (CA) - TBD

[cmitch024]

1) Slideways (CA) - Epoxy/Rivet Vincebar
2) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
3) ej257 (NE) - Weld-in + Tooling Kit
4) Bimmerrodg (montreal,Canada) epoxy/rivet + tool kit
5) BoostedBoobs (Toronto, Canada) Weld-in kit
6) EthanolTurbo (CA) - Vincebar
7) bran.stum (CA) - Weld in kit, might need tool kit as well. I’ll verify
8) K-Dawg (FL) - Epoxy/rivet kit + tooling kit
9) simonnim (CA) - Epoxy/rivet + tooling kit
10) hallerhan (PA) - Weld in kit
11) SQ13 (TX) - TBD
12) SQ13 (TX) - TBD
13) cmitch024 (TX) - TBD

[Slideways]

Could I get just the tooling kit for the epoxy/rivet bar? I bought the bar from a forum user last year, but it did not include the tooling kit.

Thanks.

Jesse

The GB is mainly for the Vincebar with the tool kit being an optional addition, but PM me.

[D-O]

Could I get just the tooling kit for the epoxy/rivet bar? I bought the bar from a forum user last year, but it did not include the tooling kit.

Thanks.

Jesse

[zzyzx85]

Sorry, gotta drop out. need the money for more urgent not-car related needs.

1) Slideways (CA) - Epoxy/Rivet Vincebar
2) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
3) ej257 (NE) - Weld-in + Tooling Kit
4) Bimmerrodg (montreal,Canada) epoxy/rivet + tool kit
5) BoostedBoobs (Toronto, Canada) Weld-in kit
6) EthanolTurbo (CA) - Vincebar
7) bran.stum (CA) - Weld in kit, might need tool kit as well. I’ll verify
8) K-Dawg (FL) - Epoxy/rivet kit + tooling kit
9) simonnim (CA) - Epoxy/rivet + tooling kit
10) hallerhan (PA) - Weld in kit
11) SQ13 (TX) - TBD
12) SQ13 (TX) - TBD

[SQ13]

1) Slideways (CA) - Epoxy/Rivet Vincebar
2) Zzyzx85 (CA) - Weld Vincebar (might need tool kit. will verify with my guy)
3) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
4) ej257 (NE) - Weld-in + Tooling Kit
5) Bimmerrodg (montreal,Canada) epoxy/rivet + tool kit
6) BoostedBoobs (Toronto, Canada) Weld-in kit
7) EthanolTurbo (CA) - Vincebar
8) bran.stum (CA) - Weld in kit, might need tool kit as well. I’ll verify
9) K-Dawg (FL) - Epoxy/rivet kit + tooling kit
10) simonnim (CA) - Epoxy/rivet + tooling kit
11) hallerhan (PA) - Weld in kit
12) SQ13 (TX) - TBD
13) SQ13 (TX) - TBD