heinzboehmer's 2002 Topaz 6MT Coupe

[karter16]

Thanks ethan for hosting! Files can be downloaded here: http://bry5on-nam3forum.sfo2.digital...step_files.zip

Apologies for the thread hijack.

[mention]Bry5on [/mention] are you okay with me adding this to the CAD files master list sticky for everyone's future reference? https://r.tapatalk.com/shareLink/top...ink_source=app


Sent from my iPhone using Tapatalk

[heinzboehmer]

Think this pic illustrates the motivation behind the camber arms quite well:



Rear right wheel looks almost like it's got positive camber!

Also, cool pic with friends:

[Bry5on]

Happy to host them on S3. PM me if that would be helpful.

Thanks ethan for hosting! Files can be downloaded here: http://bry5on-nam3forum.sfo2.digital...step_files.zip

[heinzboehmer]

Also I believe heinzboehmer redesigned the upper duct to better match the dust shield if memory serves. Heinz, shoot me that file if you want.

Sorta. I redesigned the upper duct to match my modified brake shields. I had previously cut them to install circular flanges for traditional brake duct hoses.




Happy to share the files, but they're matched to the cut shields on my car, so not sure they'll be useful to anyone else.

[ethan]

Follow instructions here for flap trimming: https://nam3forum.com/forums/forum/m...963#post253963

Trying to upload step files but they’re too big for the forum. Will have to find a spot to host them. Also I believe heinzboehmer redesigned the upper duct to better match the dust shield if memory serves. Heinz, shoot me that file if you want.

Happy to host them on S3. PM me if that would be helpful.