Announcement

Collapse
No announcement yet.

Black & Tan 332iT

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bry5on
    replied
    Originally posted by George Hill View Post
    Unfortunately it makes no torque lol. HTE couldn't get it to make any power up top but I have some graphs from similar setups make a ton of HP up top (Epic Tune) so I'm not sure what the problem was. The consensus seems to be the 2-1 merge kills the torque but makes the noise so I'm conflicted haha. I was thinking about making a second 2-1 merge that is either bigger or to carry it out longer.

    I think this kit is for an E36 and I've made it work in the E46 chassis. I don't know how different it is from his E46 kit (or if there is a difference at all), but it would be hard to package in an E46. This one is going to require a custom A/C line (and I had to cut the metal partition).
    I guess one of us needs to scan an s54 without headers installed with the shear plate...

    Modeling equal length headers shouldn't be very tough and there are a few online suppliers that do custom mandrel bent tubing nowadays. Should be a lot easier now than it was back in the 2000s and 2010s.

    Leave a comment:


  • George Hill
    replied
    Originally posted by davidinnyc View Post
    "Was that a flame? Oh, yeah, well of course there's an exhaust pipe coming from the side skirt."

    That 6-to-1 looks so good... tempting.
    Haha, ya its ridiculous but so much fun. I'm trying to tame it down without losing its character though. And its splitting hairs but its actually a 6 - 2 - 1




    Originally posted by Bry5on View Post
    wow that sounds buttery smooth, almost more like an s38 than an s54. Always preferred the s38 exhaust note. I like it!
    Unfortunately it makes no torque lol. HTE couldn't get it to make any power up top but I have some graphs from similar setups make a ton of HP up top (Epic Tune) so I'm not sure what the problem was. The consensus seems to be the 2-1 merge kills the torque but makes the noise so I'm conflicted haha. I was thinking about making a second 2-1 merge that is either bigger or to carry it out longer.

    I think this kit is for an E36 and I've made it work in the E46 chassis. I don't know how different it is from his E46 kit (or if there is a difference at all), but it would be hard to package in an E46. This one is going to require a custom A/C line (and I had to cut the metal partition).

    Leave a comment:


  • Bry5on
    replied
    Originally posted by George Hill View Post
    wow that sounds buttery smooth, almost more like an s38 than an s54. Always preferred the s38 exhaust note. I like it!

    Leave a comment:


  • bmwfnatic
    replied
    Originally posted by davidinnyc View Post

    Ok - very cool...

    "Was that a flame? Oh, yeah, well of course there's an exhaust pipe coming from the side skirt."

    That 6-to-1 looks so good... tempting.

    David
    One would think you have enough headers by now

    Leave a comment:


  • davidinnyc
    replied
    Originally posted by George Hill View Post
    Ok - very cool...

    "Was that a flame? Oh, yeah, well of course there's an exhaust pipe coming from the side skirt."

    That 6-to-1 looks so good... tempting.

    David

    Leave a comment:

Working...
X