Originally posted by 0-60motorsports
View Post
Announcement
Collapse
No announcement yet.
Black & Tan 332iT
Collapse
X
-
Nice! are they still making those headers?Originally posted by George Hill View Post
The only reason I initially S54 swapped my wagon was because I had a set of Kromer Kraft headers. They were old and tired but sounded amazing. They needed some repair and were pulled in favor of a "temporary" euro setup. I think that was 4yrs? ago, lol. My spring goal is to get them back on and I'm probably going to make a muffler to quiet everything down as I can't really buy anything I like at least that I can find.
Going from E36 to ZHP, I think there's room on the table to make more power and be similar sound level even if you are guessing at some parts of the design. IIRC we saw a ZHP left 15whp on the table vs a Stromung conversion muffler, Dinan or BMW Performance mufflers (E36 was even more than that).
Leave a comment:
-
What is a shear plate?Originally posted by Bry5on View PostI guess one of us needs to scan an s54 without headers installed with the shear plate....
Leave a comment:
-
I guess one of us needs to scan an s54 without headers installed with the shear plate...Originally posted by George Hill View PostUnfortunately it makes no torque lol. HTE couldn't get it to make any power up top but I have some graphs from similar setups make a ton of HP up top (Epic Tune) so I'm not sure what the problem was. The consensus seems to be the 2-1 merge kills the torque but makes the noise so I'm conflicted haha. I was thinking about making a second 2-1 merge that is either bigger or to carry it out longer.
I think this kit is for an E36 and I've made it work in the E46 chassis. I don't know how different it is from his E46 kit (or if there is a difference at all), but it would be hard to package in an E46. This one is going to require a custom A/C line (and I had to cut the metal partition).
Modeling equal length headers shouldn't be very tough and there are a few online suppliers that do custom mandrel bent tubing nowadays. Should be a lot easier now than it was back in the 2000s and 2010s.
- Likes 2
Leave a comment:

Leave a comment: