Originally posted by George Hill
View Post
Announcement
Collapse
No announcement yet.
Black & Tan 332iT
Collapse
X
-
That aluminum plate that ties the subframe to the frame rails. Which reminds me, I also want to design a flat sheet to close that M3 plate out and stiffen it up like the non-m plate
- Likes 1
-
What is a shear plate?Originally posted by Bry5on View PostI guess one of us needs to scan an s54 without headers installed with the shear plate....
Leave a comment:
-
I guess one of us needs to scan an s54 without headers installed with the shear plate...Originally posted by George Hill View PostUnfortunately it makes no torque lol. HTE couldn't get it to make any power up top but I have some graphs from similar setups make a ton of HP up top (Epic Tune) so I'm not sure what the problem was. The consensus seems to be the 2-1 merge kills the torque but makes the noise so I'm conflicted haha. I was thinking about making a second 2-1 merge that is either bigger or to carry it out longer.
I think this kit is for an E36 and I've made it work in the E46 chassis. I don't know how different it is from his E46 kit (or if there is a difference at all), but it would be hard to package in an E46. This one is going to require a custom A/C line (and I had to cut the metal partition).
Modeling equal length headers shouldn't be very tough and there are a few online suppliers that do custom mandrel bent tubing nowadays. Should be a lot easier now than it was back in the 2000s and 2010s.
- Likes 2
Leave a comment:
-
Haha, ya its ridiculous but so much fun. I'm trying to tame it down without losing its character though. And its splitting hairs but its actually a 6 - 2 - 1Originally posted by davidinnyc View Post"Was that a flame? Oh, yeah, well of course there's an exhaust pipe coming from the side skirt."
That 6-to-1 looks so good... tempting.

Unfortunately it makes no torque lol. HTE couldn't get it to make any power up top but I have some graphs from similar setups make a ton of HP up top (Epic Tune) so I'm not sure what the problem was. The consensus seems to be the 2-1 merge kills the torque but makes the noise so I'm conflicted haha. I was thinking about making a second 2-1 merge that is either bigger or to carry it out longer.Originally posted by Bry5on View Postwow that sounds buttery smooth, almost more like an s38 than an s54. Always preferred the s38 exhaust note. I like it!
I think this kit is for an E36 and I've made it work in the E46 chassis. I don't know how different it is from his E46 kit (or if there is a difference at all), but it would be hard to package in an E46. This one is going to require a custom A/C line (and I had to cut the metal partition).
- Likes 1
Leave a comment:
-
wow that sounds buttery smooth, almost more like an s38 than an s54. Always preferred the s38 exhaust note. I like it!Originally posted by George Hill View Post
Leave a comment:

Leave a comment: