SES Light but no codes?

[sdwz_m3]

SES light popped on after having the car sit for 3 months. I have the O2 sensors/SAP tuned out. Have been running the same setup for 3 years without the light, and didn’t change anything in the meantime.

OBD2 reader is showing no codes/pending codes. Any ideas?

[Obioban]

What code reader are you using? Something generic?

[sdwz_m3]

What code reader are you using? Something generic?

Yeah, Autolink generic. I’ve had success with it in the past, but can’t even clear the light. I was going to try and plug into INPA to see if I can read anything

[sdwz_m3]

Cleared codes via INPA, nothing on dash after 20 miles

[Obioban]

What code did inpa show?