If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Looking to flash a stock bin file back into my mss54hp for California smog check. The CVN needs to be reverted back to stock. Would a partial bin flash achieve this or would I need to flash a full bin file?
flash data (partial) is fine if:
data file has to meet prog file e.g prog is 322_1701.paf data has to be 1701xxxx.daf
winkfpt will show you an error
If you flashed your tune full binary you would be advised to flash back full binary
Comment