Announcement

Collapse
No announcement yet.

PWM Fan stays on at cold start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    PWM Fan stays on at cold start

    Mxkl karmonkey <[email protected]>
    15:03 (hace 0 minutos)
    para mí
    Hi everyone,
    ​I’m struggling with a PWM fan issue on my S54-swapped E30. The fan triggers at 100% immediately upon cold start, regardless of engine temperature.
    ​I believe the DME is entering fail-safe mode because it’s missing the CANbus data from the original AC system/chassis. I want to delete this fail-safe logic so the fan follows the radiator outlet temperature sensor map instead of defaulting to full speed.
    ​Can I resolve this using NCS Expert, or do I need to flash the DME using WinOLS/TunerPro?
    ​I’ve been stuck on this for days and would really appreciate any help from someone who has dealt with this swap issue before. Thanks!​

    I make it work this afternoon, i will post a reply when i know what exactly i dis, i have tuned so many things on tunerpro, Thanks
    Last edited by CARBONKEY; 03-21-2026, 01:51 PM.

    #2
    Originally posted by CARBONKEY View Post
    Mxkl karmonkey <[email protected]>
    15:03 (hace 0 minutos)
    para mí
    Hi everyone,
    ​I’m struggling with a PWM fan issue on my S54-swapped E30. The fan triggers at 100% immediately upon cold start, regardless of engine temperature.
    ​I believe the DME is entering fail-safe mode because it’s missing the CANbus data from the original AC system/chassis. I want to delete this fail-safe logic so the fan follows the radiator outlet temperature sensor map instead of defaulting to full speed.
    ​Can I resolve this using NCS Expert, or do I need to flash the DME using WinOLS/TunerPro?
    ​I’ve been stuck on this for days and would really appreciate any help from someone who has dealt with this swap issue before. Thanks!​

    I make it work this afternoon, i will post a reply when i know what exactly i dis, i have tuned so many things on tunerpro, Thanks
    Sligtly offtop- do you have a problems with error reading with Inpa or other software? i've deleted some DTCs error codes and now cant read errors properly- app freezes (Used Martyn ECUworx, inpa, Testo etc). For test i can send you my tune file if you are on 0401 software- i have no issues with fan on warm weather, you can check it.

    Comment

    Working...
    X