Coding out A/C

[silaciM3]

Would anyone happen to know where the A/C can be coded out to avoid the aux fan running at full tilt when the A/C is deleted?
I believe it was mentioned on the old forum and I can't seem to remember whether it was in the DME or IHKA module (NCS Expert).

[eacmen]

Its not so much coding out the AC but adjusting the map for the aux fan.

A tool like ecuworx might be able to do it.

[silaciM3]

Are you sure? the DME maps control the fan vs temperature and vehicle speed.
When deleting the A/C, the aux fan goes into full speed all the time, unless the A/C pressure sensor is plugged back in. Similar to when you have a faulty pressure sensor.

If I'm not mistaken, Obioban had posted about coding the A/C out so that the fan control is restored to normal even with the pressure sensor out.

[R3Z3N]

Please reference the github wiki here: Aux Fan Values w/o AC

[silaciM3]

Awesome, thx a lot.