RESOLVED: The FRM Module had to be "reset", which is different than "clear fault"...but that had to be done as well.
...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
17 results in 0.0056 seconds.
Keywords
Members
Tags
-
Any idea why I have a daytime running lamp FAULT, but all the lights are functioning?
So, the Left daytime running/parking lamp fault came on, and is pesky...it reminds you very regularly while you are driving...but all lights are lit/working....
-
Wait, the Ohlins don't have 150m of travel?? DOH!
If that's the case, these won't ride much better than the coilovers I'm coming from
Leave a comment:
-
Considering mine are about to be installed, this would be really helpful to know ASAP
Being the design adjust ride height via raising...Last edited by ultimatemj; 04-08-2022, 02:24 PM.
- Likes 1
Leave a comment:
-
Well, I decided to make the switch to the Ohlins....install next week!
Curious, how many clicks are you running the dampers, front and ...
- Likes 1
Leave a comment:
-
2012 E92 ZCP Individual (Ruby Black Metallic) - 1 of 17 E92s with X03 - this paint is SO hard to get a good representative picture! It can look "plain...
- Likes 5
Leave a comment:
-
I don't see/recall your tire setup, but Dinan has some info in their suspension kit about how front/rear tire size difference influences turn in...might...
Leave a comment:
-
How is your ride quality? In particular on "rough roads"?
Napkin math (presuming 880lb corner driver weight) points me towards...Last edited by ultimatemj; 06-25-2021, 11:15 AM.
Leave a comment:
-
Hmm, that's interesting...the article also says "the front and the rear suspensions are compressed by 4 inches (100mm) at the wheel"
...
Leave a comment:
-
Thanks for digging that up!
I reviewed the install this weekend and the preload looks correct (1/4" on a 7" spring)
...
Leave a comment:
-
Thanks for the feedback.
I think you are right, the next step is to check the pre-load, as too little could have me riding the bumpstops early and...
Leave a comment:
-
Curious what happened next...
I'm unhappy with my ride quality and my gut is the front is oversprung (8k(448lbin) which is mild by some but my understanding...
Leave a comment:
-
I think I do have dyno curves for the FA510s, but not sure about the FA500s...I'll look.
Which springs (front or rear) would you suggest...Last edited by ultimatemj; 08-25-2020, 02:44 PM.
Leave a comment:
-
Just adding a data point...
The previous owner of my car (E92 ZCP) had installed Fortune Auto 510 w/ 10K(560) front 14K (784lb) rear....
Leave a comment:
Leave a comment: