Announcement

Collapse
No announcement yet.

Induktiv Wireless device charging unit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Just got mine in. Haven’t test fitted yet but it looks pretty solid. Finish isn’t exact match, looks to be grainy and shiny. But it’s close enough for now.

    Can one of you guys do a write up on install? At least for the electrical part. I’m clueless when it comes to wiring




    Sent from my iPhone using Tapatalk

    Comment


      #62
      Originally posted by Toby22 View Post
      Just got mine in. Haven’t test fitted yet but it looks pretty solid. Finish isn’t exact match, looks to be grainy and shiny. But it’s close enough for now.

      Can one of you guys do a write up on install? At least for the electrical part. I’m clueless when it comes to wiring




      Sent from my iPhone using Tapatalk
      I thought it was supposed to be plug and play? That doesn't appear to be plug and play :/.

      Comment


        #63
        Originally posted by t3ddftw View Post

        I thought it was supposed to be plug and play? That doesn't appear to be plug and play :/.
        Yea idk where to even connect those wires in that area.

        Comment


          #64
          Originally posted by Toby22 View Post

          Yea idk where to even connect those wires in that area.
          There's a connector under the carpet below the center console with power and ground. Power is the red wire with a green stripe, and brown is ground.

          Still, I'm not gonna touch my wiring harness to install this, so thankfully I have the 18-pin connector that mates to the eject box connector (in question).

          -Ted

          Comment


            #65
            I want to say that would go to the cigarette lighter wiring. Of course if you didn't have that option (my car did) then I don't know.
            3.91 | CMP Subframe & RTAB Bushings | SMG (Relocated & Rebuilt) | ESS Gen 3 Supercharger | Redish | Beisan | GC Coilovers & ARCAs | Imola Interior | RE Rasp | RE Diablo | Storm Motorwerks Paddles | Will ZCPM3 Shift Knob | Apex ARC-8 19x9, 19x9.5 | Sony XAV-AX5000 | BAVSOUND | CSL & 255 SMG Upgrades | Tiag | Vert w/Hardtop

            Comment


              #66
              I received mine as well. Everything seems a little rushed. It's a solid piece, but a little more time to refine and polish everything would go a long way. I was a bit miffed there was nothing in the package regarding any instructions.

              They can be found online though. Link to the pdf

              2003 BMW M3 6MT Coupe - TiAg/Black

              Comment


                #67
                Originally posted by ej257 View Post
                I received mine as well. Everything seems a little rushed. It's a solid piece, but a little more time to refine and polish everything would go a long way. I was a bit miffed there was nothing in the package regarding any instructions.

                They can be found online though. Link to the pdf

                https://cdn.shopify.com/s/files/1/02...f?v=1615056176
                Hell yea. Thanks !

                and I didn’t get a tshirt. It said on checkout I’ll get a tshirt Bcs I ordered so early
                Last edited by Toby22; 03-18-2021, 08:00 AM.

                Comment


                  #68
                  Originally posted by t3ddftw View Post

                  I thought it was supposed to be plug and play? That doesn't appear to be plug and play :/.
                  I installed mine the other day and it is plug and play if you have the cigarette lighter in the ashtray area. You just have to remove the shifter trim area and piggy back into the 12V/Ground that goes into the cigarette lighter

                  Comment


                    #69
                    thanks to everyone who pre-ordered on here! if you didnt get your shirt please DM us your order number and we will ship asap.

                    As far as the pre-ordered units when we recieved they were not perfect and had to make changes to each and every one as we posted about. the next batch of 100 pieces will have all changes done by factory.

                    Comment


                      #70
                      hello mike, when will a unit come to germany?

                      Comment


                        #71
                        Originally posted by INDUKTIV View Post
                        thanks to everyone who pre-ordered on here! if you didnt get your shirt please DM us your order number and we will ship asap.

                        As far as the pre-ordered units when we recieved they were not perfect and had to make changes to each and every one as we posted about. the next batch of 100 pieces will have all changes done by factory.
                        Does this mean those of us who preordered got the bad batch? Please clarify. Thanks

                        Comment


                          #72
                          Hopefully all pre orders shouldn't be out there yet... as I still have yet to receive mine...

                          2005 IR/IR M3 Coupe
                          2012 LMB/Black 128i
                          2008 Black/Black M5 Sedan

                          Comment


                            #73
                            Originally posted by t3ddftw View Post

                            Still, I'm not gonna touch my wiring harness to install this, so thankfully I have the 18-pin connector that mates to the eject box connector (in question).
                            Do you have a part number for the connector?

                            Comment


                              #74
                              Originally posted by elbert View Post

                              Do you have a part number for the connector?


                              You'll need some terminals too: https://www.newark.com/amp-te-connec...5?st=1355719-1

                              Get 1355719-1 MQS Automotive Terminals specs, pricing, inventory availability, and more from TE Connectivity. Get a sample or request a quote.


                              -Ted

                              Comment


                                #75
                                Got mine installed. Everything works as described. Phone charges well. Connectors are plug and play.

                                Fit and finish is far from perfect lol. Not bad, but not good either.

                                This one section on passenger side has small gap, not noticeable unless you look at it eye level. Overall the added feature and cup holder is good enough for me to want to keep it on.





                                Sent from my iPhone using Tapatalk

                                Comment

                                Working...
                                X