Announcement

Collapse
No announcement yet.

FS: S54 Motor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FS: S54 Motor

    Low mileage S54 motor out of a 2005 smg car that was rear ended. 59k miles. Rod bearings and beisan vanos kit along with beisan pump hub and chain tensioner are in the process of being installed. New throttle body gaskets, vacuum tube gaskets. Cleaned and flowed injectors. New front and rear main seals.. Put this together for a second e36 which never materialized. $8k with the bearings and vanos etc done, or 6k without, picked up in NYC.
    Last edited by smee123; 02-10-2021, 05:25 AM.

    #2
    Motor is mostly back together with all new seals gaskets, new throttle body actuator arms. Injectors are in the process of being cleaned and flow matched.. E46 harnesses and engine accessories are included.

    Comment


      #3
      good deal here!
      Instagram: @_Frank_Stone_

      Comment


        #4
        Originally posted by Onefastsicilian View Post
        good deal here!
        I know, I'm in extreme hoarder of parts and even this is tempting me.
        2004 Silbergrau Metallic 6MT
        Karbonius/OEM Snorkel/Flap/HTE Tuned
        Ssv1/Catted Sec. 1/SS 2.5" Sec. 2/SCZA

        OE CSL Bootlid/AS SSK/BC Coils/4.10 Gears/ Sportline 8S Wheels/Cobra Nogaros
        RACP Plates/Vincebar/CMP/Turner RTAB/Beisan

        2006 M6 Black Saphire SMG
        Instagram

        Comment


          #5
          Injectors are coming back next week and then it will be ready to rock. Headers go with it however they are missing the hardware.

          Comment


            #6
            This is the first iteration. A white coupe would have followed done the same exact way. An extremely low mileage z3 3.0 coupe fell into my lap so now I have no space for a third car. Smart move long term is to ditch the motor and enjoy the z3. So for those of you that are wondering, no story behind this. I purchased this motor with the intention of keeping it and building another e36.

            The z3 pics for everyones viewing pleasure.

            Last edited by smee123; 02-26-2021, 03:20 PM.

            Comment


              #7
              pm'd you
              [AW / Cinnamon / 6MT] /// [build journal]

              Comment


                #8
                Thanks, replied.

                Comment


                  #9
                  Motor will have bearings done. I was asked to pull the pan and take pictures. No point on putting the pan back with old bearings even tho the ones in there look great. Wpc bearings and m10 arps going in, stretched to length not torqued. Stuck a bore cam in there for good measure as well.. Price will go up to 7k.

                  Attached Files

                  Comment


                    #10
                    Bearings got done. Stretched the bolts to .0070 bearings that came out indicate the low miles.


                    Attached Files

                    Comment


                      #11
                      Vanos is now also done and the motor is back together.
                      Attached Files

                      Comment


                        #12
                        Will entertain offers as I need this out of the garage.

                        Comment


                          #13
                          SOLD!

                          Comment

                          Working...
                          X