N22 csl

[Harwoodandy]

I recently replaced mine (September last year), along with the headlight bolts - it was £85 in total for everything . It took less than 20 mins start to finish.

Before:






After:

Makes a huge difference and lifts the engine bay:thumbs:

[outnumbered]

I did the same a couple of years ago - very worthwhile cosmetically. The only thing you have to watch is that you adjust the new strikers so that they activate the SMG bonnet relay properly. Guess what I didn't do initially...

I also took the strut brace off and painted the scratched bits black.

[Mike RT4]

I did the same a couple of years ago - very worthwhile cosmetically. The only thing you have to watch is that you adjust the new strikers so that they activate the SMG bonnet relay properly. Guess what I didn't do initially...

I also took the strut brace off and painted the scratched bits black.

I was able to line mine up identically due to the rust :bigcry: :hahaha:.

[CSLScot]

Don’t suppose you have a list of the part numbers handy? Certainly seems like the most cost effective solution to refreshing those parts!

[Harwoodandy]

Don’t suppose you have a list of the part numbers handy? Certainly seems like the most cost effective solution to refreshing those parts!

Here you go;

51238229807 x 2 (upper part)
51238203862 x 2 (lower part)
51237203737 x 4
51233447111 x 2
07146985055 x 6

last three are the fixings btw

[CSLScot]

Here you go;

51238229807 x 2 (upper part)
51238203862 x 2 (lower part)
51237203737 x 4
51233447111 x 2
07146985055 x 6

last three are the fixings btw

Many thanks 👍

[outnumbered]

I was able to line mine up identically due to the rust :bigcry: :hahaha:.

They also adjust for length, which is what I missed initially. If they're not wound out enough, they don't trigger the SMG microswitch.