Unlock MSS60 CPU via OBD

[pyth0n]

Use option RSA bypass from MSS6X flasher tool

I did it on BMW M3 2007 MSS60 with sample KDCAN cable and after that ECU is not giving identification anymore. No response on Tool32 too. Can I restore it with Ktag? I just need to get ISN.

Idents:
HW: 0569QT0
Program version: 240E
Software version: EKEV0

[MpowerE36]

I think your ecu is bricked. It is not possible to restore it with Ktag.

[pyth0n]

I think your ecu is bricked. It is not possible to restore it with Ktag.

I have readen Full and Tune dump. It is not possible to write it via BDM?
With which tool I can then? Xprog, BDM100, Galetto 54?

[MpowerE36]

None of these tools. You need a debugging tool. There is a post about your problem here :

https://nam3forum.com/forums/forum/e9x-2008-2013/e9x-coding-tuning/11436-mss60-research

[pyth0n]

None of these tools. You need a debugging tool. There is a post about your problem here :

https://nam3forum.com/forums/forum/e...mss60-research

I've read this thread, but not found any solution. Also your post is giving me a hope

https://nam3forum.com/forums/forum/e9x-2008-2013/e9x-coding-tuning/11436-mss60-research?p=193733#post193733

Can you also please share tool by Vincent please? I can't PM you

[MpowerE36]

There is no turnkey tool, but you need tools like Macraigor wiggler or PeMicro debugging tool.

[pyth0n]

There is no turnkey tool, but you need tools like Macraigor wiggler or PeMicro debugging tool.

I've watched your video "Unlock MSS60 CPU via OBD". It's works only on unbricked ECU with Pro KDCAN cable?

[MpowerE36]

I've watched your video "Unlock MSS60 CPU via OBD". It's works only on unbricked ECU with Pro KDCAN cable?

Yes exactly. When the ecu is bricked, it must be done via bdm with debugging tool.