Check for tuning / CVN checksum

[glitch_bit]

Hi - I've acquired a M3 and I want to check if it's got a tune installed or not, what is the easiest way? I have access to INPA, Protool, Tool32 and a K+CAN cable available. Ideally I'd like to (from google searching) run a Mode $09 check which should return a CVN value right? What would indicate it's a tune and what should that value be?

It's an 08 M3 so MSS60. Cheers

[ppm008]

Tool32, load SGBD MSS60
left scroll down to STATUS_CHECKSUMMEN_INJ and press F5
in the right window you will see the result
post here:
STAT_CRC32_PROG_CARB_NV (Programm-CRC fuer Mode 9)
STAT_CRC32_DATA_CARB_NV (DATEN-CRC fuer Mode 9)
STAT_K_SK_CRC32 (CRC32-Aktivierung)

Do the same for
STATUS_CHECKSUMMEN_IGN

I will give You the answer tuned or not

[ppm008]

You can also INPA use to get CRCs:
Press Shift-F1 and post screenshot.
Do the same Shift-F2