Announcement

Collapse
No announcement yet.

Uneven ride height after coilover install.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by Rkymtnrider View Post

    Yah, but, dont you have to take em off to adjust?
    Nope. You just jack the car up on the corner your'e working on and take the wheel off. Crank the collar with that wrench KW provides in the kit and you'll see the spring move up and down. New coilovers usually move pretty easily. It's a bit of a guess and check kind of deal but give yourself an afternoon and you'll get fast at it after a while haha.

    Corner balancing with your alignment is a good idea for sure, here you can get that done for like $250-$300 and it's worth it. But the ride height won't be even, it will be a little higher on the driver's side usually when no one is sitting in the car. If you corner balance and then lower one side just a little, it won't really make a huge difference to how it feels when you drive the car. That being said, it's still best to do the corner balancing and not nitpick over a couple mm difference in ride height, just call it done and enjoy it.
    http://www.natehasslerphoto.com
    '99 M3, Hellrot/Sand Beige, slicktop
    '01 M3, Imola/black

    Comment

    Working...
    X