Side Finisher Rubber Replacement and Rear Side Window Trim Replacement

[PSUEng]

I sent Matt an email. Tbd...

Here is one out of the wrap comparing to my original. The parts you seem to have might actually have a nicer finish than my Gen. parts (I had to polish them up to remove the mold marks); I'd pull that adhesive, clean them up and if they look good, run them. I have two sets of quarter glass seals (1 spare) from Matt and they were very good quality.

[dHam_Slow.46M]

Either I'm being dense or these are wrong. Can someone confirm? I couldn't find any other pics of these or issues with them.

Ordered these last year and prepping for install now. The tops of both of these weatherstrips have double sided tape on them. It's not just a protection film, it's double sided tape. From top to bottom on the pic: bottom of passenger side with 2 strips of tape (correct), top of driver side with one strip of tape (is this a QC error?), top of OEM driver side.

I made the same mistake. The ones Matt sells are only for cars that have the extra chrome gloss black trim pieces unfortunately. Was able to sell my set locally but I'm stuck w/o a driver-side bottom rear trim now😓

EDIT: jsut realized he's now finally selling the matte finish sets. hopefully he'll correct the mistake if that's what you ordered

[Keith_MN]

Yep that's what I did, just made a dumb mistake when ordering and didn't understand what i received.

[dHam_Slow.46M]

For anyone who needs to replace both sides, Matt Navis' shop finally has the matte/shadow bottom piece available: https://matthewnavis.com/product/all...r-matte-black/

I guess for people like me who ended up getting the pass/right side, its better to ahve the 1 spare than cracked/missing strip

[PSUEng]

For anyone who needs to replace both sides, Matt Navis' shop finally has the matte/shadow bottom piece available: https://matthewnavis.com/product/all...r-matte-black/

I guess for people like me who ended up getting the pass/right side, its better to ahve the 1 spare than cracked/missing strip

This is good to know he's providing these. I'd love to see pics of a set if anyone orders them because, as I mentioned, my Gen. parts were a let down.

Damn, his quarter seals went through the roof in price.

[Keith_MN]

This is good to know he's providing these. I'd love to see pics of a set if anyone orders them because, as I mentioned, my Gen. parts were a let down.

Damn, his quarter seals went through the roof in price.

I'll post them up when I get them.

[P Swayz]

So does anyone know why in the hell the price has tripled for these rubbers??

https://www.ebay.com/itm/225606622802

[0-60motorsports]

So does anyone know why in the hell the price has tripled for these rubbers??

https://www.ebay.com/itm/225606622802

The manufacturer increased their prices and he increased his, im sure its as simple as that.

[dHam_Slow.46M]

This is good to know he's providing these. I'd love to see pics of a set if anyone orders them because, as I mentioned, my Gen. parts were a let down.

Damn, his quarter seals went through the roof in price.

I'll also post some pics with some comparison with the OEM pass/right side I have sitting on the shelf.

Also, anyone know if there's still a discount code? The original NAM3 doesn't seem to work anymore

[0-60motorsports]

I'll also post some pics with some comparison with the OEM pass/right side I have sitting on the shelf.

Also, anyone know if there's still a discount code? The original NAM3 doesn't seem to work anymore

You have to message him for the discount. He will send you the code.

[Flow]

Oh damn, there is a code ?
I've ordered all the seals at full retail price

[0-60motorsports]

Oh damn, there is a code ?
I've ordered all the seals at full retail price

That's ok since it's too late don't bother yourself about it. There is NO “code” as per se but you can email him and if he wants he will give you a code. I tried and he was kind enough to hook me up with a code.

[P Swayz]

Sweet I'll send him a message about the code. Anything helps nowadays...