What kind of lubricant should I use on the transmission input shaft splines?

[BMWE46M3]

Like the title says, I'm about to reinstall my transmission and cleaned the splines but would like to know what I should apply to the splines? I'm assuming some kind of high temp anti-seize, but I may be wrong and am looking for some advice. Thanks guys...

[cobra]

I have no idea but probably a high pressure grease or moly paste, which is what usually goes on splines.

https://www.amazon.com/Loctite-234227-LOC51048-Anti-Seize-Compound/dp/B001HWBSJW/ref=sr_1_1_mod_primary_new?keywords=moly+paste&qid=1664672477&qu=eyJxc2MiOiI0LjYwIiwicXNhIjoiMy42OCIsInFzcCI6IjMuMjIifQ%3D%3D&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sr=8-1

[FBloggs]

Use some moly grease, then wipe it off.
You want a thin veneer over the splines.
You don't want it slung off.

[bigjae46]

Use some moly grease, then wipe it off.
You want a thin veneer over the splines.
You don't want it slung off.

Yeah, grease and oil on the clutch disc is not good.

[BMWE46M3]

I was able to determine the correct lubricant to use and wanted to share with other if you need it down the road. It's Sachs Clutch Disc Spline Grease (part # 4200080050) https://www.fcpeuro.com/products/clu...chs-4200080050. And here is a video of how to apply it. https://aftermarket.zf.com/us/en/sac...he-hub-spline/