M3 Wheel Fitment

[S54 Schnauzer]

So I’m sure this topic has been discussed previously, but was hoping for some insight. I recently picked up an e46 and have a set of wheels I ran on my e90 m3 that I was wondering if they would fit on the e46..

19x10 et 27
19x11 et 31

Any input would be appreciated and also if anyone knows what size tires would be best that’d be great too.

Suspension is Koni ground control I believe dropped about an inch.

Thanks


Sent from my iPhone using Tapatalk

[Mr.wReckless]

If you have both why not try them? I suspect the fronts will poke a bit though.

Regards

[bmwfnatic]

I am not an expert, but I think you could make the fronts work with a quite a bit of negative camber.

The rears to me seems like they would fit inside the arches (perhaps if the lip is cut/rolled).
But the inside of those rear wheels will poke out like 23mm more than stock wheels would, not sure if that clearance is there.

[9kracing]

That's a very aggressive setup and will take a bunch of work to make it fit.

[S54 Schnauzer]

Appreciate the input everyone. I’ll probably just end of selling them and getting a different set


Sent from my iPhone using Tapatalk