10 mm spacer with 40 mm bolts?

[Distinct]

Looking to verify something. I am about to buy a set of 10 mm wheel spacers for the fronts and some of the kits have 40 mm bolts and it seems like this would be a few mm too long compared to the stock bolts. Does anyone know if this is an issue or what the right length should be? Thank you very much.

[MrClutch55]

you will be fine, shank oem stock length should be 27mm. For 10mm spacers, you should be able to use either 35mm or 40mm safely.

[Tbonem3]

Oe is 25mm, but it's ok to be 5mm extra in front. In rear might hit the parking brake.

[Distinct]

Thank you all so much! Time to order!