Looking to verify something. I am about to buy a set of 10 mm wheel spacers for the fronts and some of the kits have 40 mm bolts and it seems like this would be a few mm too long compared to the stock bolts. Does anyone know if this is an issue or what the right length should be? Thank you very much.
-
-
you will be fine, shank oem stock length should be 27mm. For 10mm spacers, you should be able to use either 35mm or 40mm safely. -
Oe is 25mm, but it's ok to be 5mm extra in front. In rear might hit the parking brake.DD: /// 2011.5 Jerez/bamboo E90 M3 · DCT · Slicktop · Instagram
/// 2004 Silvergrey M3 · Coupe · 6spd · Slicktop · zero options
More info: https://nam3forum.com/forums/forum/m...os-supersprintComment
-
Thank you all so much! Time to order!Comment
Comment