Switched 12v question

[sapote]

check X60004 pin26: it should only has 12v with ignition sw ON, and 0v when off. The DME only wakes up and energizes the relay when this pin got 12v.

[smee123]

Fixed this. It was a lazy ignition switch.

[sapote]

Fixed this. It was a lazy ignition switch.

No need to replace the switch; just remove it off and open the plastic cover, then clean the 6 contacts using Xactor blade (I used the 90* edge of the spine).

[smee123]

Thanks. Replacing was quick and easy and saved me some time. Thank you for the feedback.