Bi-Xenon Headlight Rebuild/Repair Broken Adjuster Assembly?

[umichchris]

I have searched online, I don't see replacement parts to rebuild the level adjustment assembly for Bi-Xenon lights. Both my lights have broken adjusters. The passenger side is the worst where the white plastic screw piece literally fell out of the assembly when I pulled it out of the car.

What solutions exist out there? For now, I had to force the assembly into its highest position so I can at least see the road vs the lights pointing only within 3ft of me driving.

[SQ13]

You can 3D print the screws. File attached in the first post of this thread.

https://nam3forum.com/forums/forum/main-forum/e46-2001-2006/204992-fyi-01-m3-single-xenon-to-bi-xenon-retrofit

[BlueBimmers]

Are they broken or detached? I was able to put mine back in slot when I did ZKW-R lens recently:

https://chrisparente.com/2023/03/11/e46-m3-zkw-r-lens-upgrade/

[BlueBimmers]

umichchris - Did you ever find any solution? One of my headlights is pointing down, and both adjusters are broken. I don't know what to do with the 3D print link. What I really need is a replacement for the entire plastic housing.